Abstract:Methanol as a hydrogen carrier can be reformed with steam over Cu/ZnO/Al2O3 catalysts. In this paper a comprehensive pseudo-homogenous model of a multi-tubular packed-bed reformer has been developed to investigate the impact of operating conditions and geometric parameters on its performance. A kinetic Langmuir-Hinshelwood model of the methanol steam reforming process was proposed. In addition to the kinetic model, the pressure drop and the mass and heat transfer phenomena along the reactor were taken into account. This model was verified by a dynamic model in the platform of ASPEN. The diffusion effect inside catalyst particles was also estimated and accounted for by the effectiveness factor. The simulation results showed axial temperature profiles in both tube and shell side with different operating conditions. Moreover, the lower flow rate of liquid fuel and higher inlet temperature of thermal air led to a lower concentration of residual methanol, but also a higher concentration of generated CO from the reformer exit. The choices of operating conditions were limited to ensure a tolerable concentration of methanol and CO in H2-rich gas for feeding into a high temperature polymer electrolyte membrane fuel cell (HT-PEMFC) stack. With fixed catalyst load, the increase of tube number and decrease of tube diameter improved the methanol conversion, but also increased the CO concentration in reformed gas. In addition, increasing the number of baffle plates in the shell side increased the methanol conversion and the CO concentration.

Modeling of a Reverse Flow Reactor for Methanol Synthesis

Modeling and Simulation Research onm-Xylene Oxidation Reactor

One Dimensional Reactor Modeling for Methanol Steam Reforming to Hydrogen

Two-Dimensional Modeling of A Plant-Scale Fixed-Bed Reactor for Hydrogen Production from Methanol Steam Reforming

CFD Modeling of Methanol-to-Olefin Processes in Fixed Bed Reactors

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

Modeling of methanol synthesis in bubble slurry column reactor

Cfd Modeling of Methanol to Olefins Process in A Fixed-Bed Reactor

Dynamic Carbon Dioxide Methanation in a Wall-Cooled Fixed Bed Reactor: Comparative Evaluation of Reactor Models

Study on Effective Radial Thermal Conductivity of Gas Flow Through A Methanol Reactor

Mathematical Simulation of Methanol Synthesis in a Slurry Reactor

One-dimensional isothermal multicomponent diffusion-reaction model and its application to methanol synthesis over commercial Cu-based catalyst

Numerical Simulation of Thermal Performance for the Reaction Tubes in a Miniaturized Methanol Synthesis Reactor

Machine Learning‐assisted Multiscale Modeling of an Autothermal Fixed‐bed Reactor for Methanol to Propylene Process

3-D Simulation of Methanol-steam Reforming for Hydrogen Production in Microreactor

CFD Simulation and Heat Transfer Optimization of Methanol Reactor

Modeling of Bubble Column Slurry Reactor for Dimethyl Ether Synthesis from Syngas

Simulation and Analysis of the Operating Conditions of Methanol Synthesis Converter

Cold modeling of a direct coupling autothermal methane reforming reactor

Cross-flow Heat Transfer in Fixed Bed

A Computationally Efficient Multi-Scale Simulation of a Multi-Stage Fixed-Bed Reactor for Methanol to Propylene Reactions