Abstract:The realization of highly efficient devices depends on efficient charge carrier injection, employment of materials, and proper fabrication methodologies. However, it is difficult to manufacture highly efficient large-area devices due to the varied thickness of organic layers and low mobility of charge carriers. Solution and thermal evaporation processes have been reported for the fabrication of highly efficient and long-lifetime organic light-emitting diodes (OLEDs). This work reveals appropriate performance enhancement by employing solution-processable nanocomposite, i.e., titanium oxide (TiO2) nanoparticles embedded in 2,2′,2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi) as an electron-transport layer with high electron mobility and good compatibility with the yellow emissive layer. Topographies of TiO2-doped TPBi films with different doping concentrations are observed after annealing at 60 °C. The device using a 20 wt % TiO2-doped TPBi exhibits maximum power efficacy of 56.1 lmW–1, current efficiency of 53.9 cdA–1, and external quantum efficiency of 15.4%, while that without TiO2 nanoparticles showed values of 37.0 lmW–1, 35.1 cdA–1, and 10.8%, respectively. The enhancement may be attributed to improved electron mobility, efficient hole-blocking, and reduced barrier height. The solution-processable TiO2-doped TPBi may lead to an efficient fabrication strategy for next-generation lighting and display applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaelm.0c00166.Cyclic voltammograms of the electron-transport materials TPBi and TiO2; scanning electron microscopy of the electron-transport material TiO2 deposited on a silicon substrate.This article has not yet been cited by other publications.

A New Kind of Buffer Layer of TiO 2 Self-Assembled Material in Organic Electroluminescent Devices

Enhanced Brightness and Efficiency in Organic Electroluminescent Device Using Tio2 Self-Assembled Layers

Enhanced Hole Injection in Organic Light-Emitting Devices by Using Fe3O4 As an Anodic Buffer Layer

Buffer-enhanced Electron Injection in Organic Light-Emitting Devices with Copper Cathode

Enhancement of Electron Injection in Organic Light-Emitting Devices Using an Ag/LiF Cathode

Efficient light emitting diodes with Teflon buffer layer

Nanocomposite Electron-Transport Layer Incorporated Highly Efficient OLED

Obvious Efficiency Enhancement of Organic Light-Emitting Diodes by Parylene-N Buffer Layer

Improved Hole Injection And Transport Of Organic Light-Emitting Devices With An Efficient P-Doped Hole-Injection Layer

Efficient organic light-emitting diodes with teflon as buffer layer

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

Application of Electrochemical Impedance Spectroscopy in Organic Solar Cells with Vertically Aligned TiO<sub>2</sub> Nanorod Arrays as Buffer Layer

TiO2 nanoparticles via simple surface modification as cathode interlayer for efficient organic solar cells

UV-ozone treated Ti3C2Tx-MXene nanosheets as hole injection layer for organic light-emitting diodes

Modification of ITO with Composite Self-Assembled Monolayer Enables Hole Injection and Transport Layer-Free TADF-OLED with Preferable Performance

Application of Electrochemical Impedance Spectroscopy in Organic Solar Cells with Vertically Aligned Tio2 Nanorod Arrays As Buffer Layer

High-efficiency Blue-Emitting Organic Light-Emitting Devices with 4, 4′, 4″-Tris(n-carbazolyl)-triphenylamine As the Hole/exciton-Blocking Layer

Mechanisms of Injection Enhancement in Organic Light-Emitting Diodes Through Insulating Buffer

Large-area, High-Quality Self-Assembly Electron Transport Layer for Organic Optoelectronic Devices

High Luminance Organic Light-Emitting Diodes with Efficient Multi-Walled Carbon Nanotube Hole Injectors