Abstract:The study involved plasma arc transfer welding (PTAW) for preparing coatings of Inconel 625 alloys that contained different amounts of nano-sized hafnium carbide (nano-HfC) particles. The impact of nano-HfC on the microstructure evolution and mechanical properties of PTAWed Inconel 625 were investigated. The research reveals that nano-HfC decomposes during the high-temperature plasma arc process and then react with O element to generate nano-HfO2. These HfO2 can serve as nucleation sites for MC carbides, which restricts the growth of secondary dendrite arms, leading to a more disordered grain growth direction. Simultaneously, the decomposition of HfC can increase the C/Nb ratio of the matrix, effectively suppressing Laves phase formation while encouraging the development of MC carbides. Compared with IN625, the wear rate of composites at room temperature and 600 degrees C were decreased. Notably, at 600 degrees C, the wear rate of the coating with 0.5 wt% HfC is the lowest among all the samples, as reflected by a noteworthy reduction in wear rate of 50 %. This is mainly attributed to the refinement of gamma matrix, reduction of Laves phase as well as precipitation of the fine-sized MC carbides. This work illustrates that adding nano-HfC is an effective way to improve the wear resistance of the PTAWed Inconel 625.

Comparison Of Nano-Composite W-6%Tho2 And W-2%Tho2 Cathode

Effect of high content nano-thoria addition on the properties of tungsten electrode

Nanocomposite W–4.5%ThO2 thermionic cathode

W–ThO2 thermionic cathode activated with nanoscale oxide

Characteristics and microstructure of high doping nanocomposite W-ThO2 thermionic cathode material by swaging method

Characteristics Of W-Tho2 Thermionic Cathode Activated With Nanoscale Oxide

A Thermionic Tungsten Cathode Activated with Nanothoria and Prepared by Swaging Method

Preparation of Nanocomposite Thoriated Tungsten Cathode by Swaging Technique

Electron Emission of W-Nano-ThO2 Electrode

Preparation of Ti/Al based nanophase composite powder by mechanical alloying

Arc Characteristic of Nanocrystalline W-La2O3 Electrode Materials

Microstructurally Stable Nanocomposite WTaMoNb/Cu Prepared by Mechanical Alloying and Hot Pressing Sintering

Thermal performance of Cu/Al micron-nanometer composites with tungsten trioxide

Comparison of three kinds of MC-type carbide modified thick W coatings fabricated by plasma transferred arc surfacing

The Nano Tungsten Thin Film and its Contacting Property with Aluminium Electrodes

The superior thermal stability and irradiation resistance capacities of tungsten composites synthesized by simple second-phase particle component modulation

High Temperature Brazing of Porous Tungsten with Nano Structured Mo-Ni for a Dispenser Cathode Application

Preparation Of Nanostructured W-Co Composite Powders By H-2 Plasma

Preparation and performance of a nano-honeycomb cathode for microtubular solid oxide fuel cells

Microstructure and High-Temperature Tribological Behaviours of Nano-Hfc Reinforced Inconel 625 Composite Coating by Plasma-Transferred Arc Welding

Fabrication and Emission Performance of Nanostructured Re-W Matrix Impregnated Cathodes.