Abstract:Particle reinforced metal matrix composites (PR-MMCs) have attracted extensive investigation in material science and engineering. They combine both strength and toughness and show excellent properties such as good wear resistance, corrosion resistance and high temperature properties. Laser depositing of metal matrix composite coatings containing in-situ carbide particles is a research focus in laser surface processing. The essential advantage of the in-situ synthesis technology is that the reinforcements are much more compatible with the matrix and the interface between the reinforcements and the matrix is much cleaner. It has a special advantage in high distribution density and dimension uniformity to in-situ synthesize particles by laser melting precursor powders containing several strong carbide-forming elements (SCFEs) rather than one. Each SCFE has significant effects on the precipitation and distribution of the carbide particles. To investigate the microstructure and properties of the cladded layers, in this paper, the coatings were produced by laser cladding powders containing 2%Ti, 1%Ti+1%Zr and 1%Ti+1%Zr+10%WC (mass fraction) respectively on the surface of a medium carbon steel. The microstructure of the coatings and the carbide particles were studied by X-ray diffractometer (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that the microstructure of the coatings is typically hypo-eutectic. The in-situ particles have a TiC structure with high content of Zr or W when 1%Ti+1%Zr and 1%Ti+1%Zr+10%WC are added into the cladded powders. Therefore, they are multiple carbides. The interface between the particle and the base material is strong. The optimized distribution of the particles with high distribution density (2x10(4) mm(-2)) and high dimension uniformity (about 1 mu m) are obtained when 1%Ti+1%Zr+10%WC are added. The wear resistance of the coating was tested through ring-on-block wear experiment. It is indicated that laser cladding Fe-based composite coating reinforced by in-situ multiple carbide particles presents excellent wear resistance.

Comparison of three kinds of MC-type carbide modified thick W coatings fabricated by plasma transferred arc surfacing

Microstructure evolution and tribological behavior of laser cladded Al 1.8 CrCuFeNi 2 /WC composite coatings on Ti-6Al-4 V

Comparative Study of Multilayer Hard Coatings Deposited on WC-Co Hardmetals

Wear Properties of Plasma Transferred Arc Fe-based Coatings Reinforced by Spherical WC Particles

Microstructure and Tribological Properties of WC/Ni-MoS2 Titanium-Based Composite Coating on TC4

Microstructural evolution and wear characteristics of laser-clad CoCrFeNiMn high-entropy alloy coatings incorporating tungsten carbide

Study on the friction and wear performance of laser cladding WC-TiC/Ni60 coating on the working face of shield bobbing cutter

STUDY ON WEAR RESISTANCE OF LASER CALDDING Fe-BASED COMPOSITE COATINGS REINFORCED BY IN-SITU MULTIPLE CARBIDE PARTICLES

Effect of NbC in-situ synthesis on the microstructure and properties of pre-placed WCoB-TiC coating by laser cladding

Wear‐Resistant Titanium Carbonitride Coatings Onto WC–Co Cutting Tools by Pulsed High‐Energy Density Plasma

Comparison of W–TiC Composite Coatings Fabricated by Atmospheric Plasma Spraying and Supersonic Atmospheric Plasma Spraying

Effect of Chromium Carbide Addition on the Microstructures and Properties in Dual Carbide Phases Reinforced Ni-Based Composite Coatings by Plasma Cladding

Microstructure and mechanical property of high velocity oxy-fuel sprayed multimodal WC-Cr3C2–Co–Y2O3 cermet coating

Microstructure and properties of composite coatings by laser cladding Inconel 625 and reinforced WC particles on non-magnetic steel

Microstructure characterization and wear performance of WC-10Co/Ti-6Al-4V coating fabricated via electron beam cladding

Research on microstructure, mechanical property and wear mechanism of AlCoCrFeNi/WC composite coating fabricated by HVOF

Comparative investigation on microstructures and properties of WC/Cr 3 C 2 reinforced laser cladding Ni-based composite coatings subjected to ultrasonic impact treatment

Study of the Performance of Laser Melting Wear-Resistant Coatings on TC4 Titanium Alloy Surfaces

Microstructure and wear resistance of bimodal cemented carbide coating prepared by direct laser powder deposition

Effect of WC addition on microstructure and properties of laser melting deposited Ti6Al4V

Optimizing Wear Resistance and Tensile Strength of Nickel-Based Coatings through Tungsten Carbide Reinforcement