Abstract:The paper offers a theoretical approach to a prediction of residue formation inherent to melting and subsequent solidification of micro layers of molten aluminum alloys. The residue formation follows a reactive flow of a portion of the melt that is removed by a surface tension action. The residue portion solidifies in situ. The phenomenon studied is associated with materials’ processing during controlled atmosphere brazing of aluminum. The model assumes that diffusion of Silicon, present in an Al+Si clad of a brazing sheet, has a twofold role. First, a solid state Si diffusion prior to melting and across the clad–core interface of a composite brazing sheet takes place and modifies alloys’ composition on both sides of the interface. Subsequently, Si diffusion within clad controls the melting process. Both processes are essential for clad residue formation. The approach advocated in this paper leads to a prediction of the residue formation through a modeling of the non-equilibrium diffusion-controlled melting. A heuristic interpretation of physical mechanisms was discussed and a related mathematical model devised. The model was solved numerically in terms of Si concentration distributions for a moving boundary problem and corroborated with empirical data. Empirical data were gathered using an experimental controlled atmosphere brazing facility. The results of the modeling and their corroboration with the experimental data indicate a strong dependence of residue formations on the pre-melting state of the clad, in particular on the grain size within Al-clad matrix. A good agreement between numerically predicted residue mass and experimental findings is documented in detail.

Diffusion behavior of silicon at interface of Al clad sheet and joint formation

Solid state Si diffusion and joint formation involving aluminum brazing sheet

Si Diffusion Across the Liquid/solid Interface of Capillary Driven (Al–si)-Kxalyfz Micro-Layers

Diffusion-Controlled Melting and Re-Solidification of Metal Micro Layers on A Reactive Substrate

Non-Equilibrium Diffusion-Controlled Melting and Re-Solidification of Thin Metal Layers on a Reactive Substrate

Dendritic Growth in Al–Si Alloys During Brazing. Part 1: Experimental Evidence and Kinetics

Influence of Si content on interfacial reactions and mechanical properties of dual-spot laser welded-brazed Ti/Al joints

Interfacial microstructure and mechanical properties of porous-Si3N4 ceramic and TiAl alloy joints vacuum brazed with AgCu filler

Understanding the Microstructure Evolution Mechanism and the Microstructure-Strength Correlations of Ti3SiC2/Ti2AlNb Joint Brazed with AgCu Interlayer

Elemental diffusion, atomic substitution mechanisms and interfacial fracture behavior in laser welded–brazed Al/Ti

Wetting Behaviour of Cu Based Active Brazing Alloys on Siliconised Graphite

Microstructure and Properties of C/C and C/SiC Composites Brazed by Reactive Infiltration of Si Zr Filler Alloy

Interfacial Microstructure and Joining Properties of TiAl/Si3N4 Brazed Joints

Interfacial Microstructure and Mechanical Property of Brazed Copper/sio2 Ceramic Joint

Microstructure and properties of C/C and C/SiC composites brazed by reactive infiltration of SiZr filler alloy

Interfacial Microstructure and Forming Mechanism of Brazing Cf/Al Composite with Al–Si Filler

Interfacial microstructure and reaction phases in Si3N4/Si3N4 joints brazed with Cu-Zn-Ti filler alloy

Interfacial microstructure and mechanical property of ZrC-SiC ceramic and TiAl joint brazed with AgZr active filler metal

Interfacial product of ZrB2-SiC brazing joint and growth kinetics of reaction layer

Research on the Interfacial Structure and Properties of TiAl - Si3N4f/Si3N4 Brazed Joints

Microstructure and Formation Mechanism of Cf/SiC and Nb Joint Brazed with Laminated Amorphous Ti–Zr–Cu–Ni/crystalline Ti Composite Filler