Abstract:Abstract lithium ion conducting polymer electrolyte is one of the essential components of modern rechargeable lithium batteries because of its good interfacial contact with electrodes and effective mechanical properties. A solid lithium ion conducting polymer blend electrolyte is prepared using poly (vinyl acetate) (PVAc) and poly (methyl methacrylate) (PMMA) polymers with different molecular weight percentages (wt%) of lithium chloride (LiCl) by the solution casting technique with tetrahydrofuran as a solvent. The polymer electrolytes were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), Thermogravimetry (TG), AC impedance spectroscopy and ionic transport measurements. XRD and FTIR studies confirm the amorphous nature of the polymer electrolyte and the complexation of salt with polymer. The thermal behavior of polymer electrolytes has been studied from DSC and TG. The highest conductivity obtained using AC impedance spectroscopy is 1.03×10 −5 Scm −1 at 303 K for 70 wt%PVAc:30 wt%PMMA:0.8 wt% of LiCl polymer-salt complex. The plasticizer ethylene carbonate (EC) and nanofiller titania (TiO 2 ) were added to the optimized high conducting blend polymer electrolyte. An enhancement in conductivity by one order of magnitude was observed for the plasticized 70 wt%PVAc-30 wt%PMMA-0.8 wt% LiCl polymer electrolyte at ambient temperature. The ionic conductivity value obtained using AC impedance spectroscopy for the plasticized 70 wt%PVAc-30 wt%PMMA-0.8 wt% LiCl polymer electrolyte was 1.03×10 −4 Scm −1 . The highest conductivity obtained for 70 wt%PVAc-30 wt%PMMA-0.8% LiCl-6 mg TiO 2 was 4.45×10 −4 Scm −1 . Dielectric properties of polymer films are studied and discussed. The electrochemical stability of 1.69 V and 2.69 V was obtained for 70 wt%PVAc-30 wt%PMMA-0.8% LiCl and 70 wt%PVAc-30 wt%PMMA-0.8% LiCl-6 mg TiO 2 polymer electrolytes, respectively, using linear sweep voltammetry. The value of Li + ion transference number was estimated by the DC polarization method and was found to be 0.99 for the highest conducting 70 wt%PVAc-30 wt%PMMA-0.8 wt% LiCl-6 mg TiO 2 nanocomposite polymer electrolyte.

STUDIES ON A NOVEL POLYMER ELECTROLYTE

Preparation Of Pvdf/P(Mma-Co-Pegma) Porous Membranes Via Phase Inversion Process For Gel Polymer Electrolyte

Preparation and Characterization of PVDF/P（MMA-co-DMAEMA） Separators for Lithium Battery

A novel polymer electrolyte based on PMAML/PVDF-HFP blend

Ion Transport and Interfacial Properties of a Novel Polymer Electrolyte

Novel Amphiphilic Polymer Gel Electrolytes Based on (Peg-B-gma)-co-mma

Research on the Interfacial Properties of Polymer Electrolyte by A. C. Impedance

Research on the interfacial properties of polymer electrolyte by AQ impedance

Study on PVDF-HFP/PMMA/CMC Blended Polymer as Membrane for Lithium-Ion Batteries

A Novel PVB Based Polymer Membrane and Its Application in Gel Polymer Electrolytes for Lithium-Ion Batteries

Preparation and performance of p(OPal-MMA)/PVDF blend polymer membrane via phase-inversion process for lithium-ion batteries

A Novel Sandwiched Membrane As Polymer Electrolyte for Application in Lithium-Ion Battery

Study on the preparation and performances of PMMA-Vac polymer electrolyte for lithium ion battery use

PREPARATION AND ELECTROCHEMICAL CHARACTERISTICS OF POLYMER ELECTROLYTE MEMBRANES BASED ON SAN/PVDF-HFP BLENDS

Synthesis and Properties of Gel Polymer Electrolyte Membranes Based on Novel Comb-Like Methyl Methacrylate Copolymers

Preparation and Characterization of a Novel Gel Polymer Membrane Based on a Tetra-Copolymer

Microporous PVDF–PMMA Blend-Based Gel Polymer Electrolyte for Electrochemical Applications: Effect of PMMA on Electrochemical and Structural Properties

A Novel Non-Woven Fabric Supported Gel Polymer Electrolyte Based on Poly(methylmethacrylate-Polyhedral Oligomeric Silsesquioxane) by Phase Inversion Method for Lithium Ion Batteries

Macroporous polymer electrolytes based on PVDF/PEO-b-PMMA block copolymer blends for rechargeable lithium ion battery

Study of PVAc-PMMA-LiCl polymer blend electrolyte and the effect of plasticizer ethylene carbonate and nanofiller titania on PVAc-PMMA-LiCl polymer blend electrolyte

A Novel Composite Microporous Polymer Electrolyte Prepared with Molecule Sieves for Li-ion Batteries