Effect of Carbon-Nanotube-Containing Biphase Liquid Lubricant on Contact Fatigue Performance of a Steel-Steel Pair

宋宝玉,曲建俊,张锋,殷玉龙,齐毓霖

DOI: https://doi.org/10.3321/j.issn:1004-0595.2003.06.019

2003-01-01

Abstract:Carbon nanotube was used as an additive in 10# machine oil. The effect of the carbon nanotube as the additive on the contact fatigue behavior of an SAE52100-SAE52100 steel pair was investigated. Thus the lubricants to be tested were prepared by dispersing selected mass fraction of the nanotubes into the 10# machine oil in the presence of ultrasonic vibration. The contact fatigue behavior of the steel pair lubricated with the base oil and the additive-doped base oil was examined on a ball-on-rod fatigue tester. The pit-corroded surface of the steel pair was analyzed by means of scanning electron microscopy and energy dispersive spectrometry, while the action mechanisms of the carbon nanotubes were discussed with respect to particle adsorption model and particulate filling-up model. It was found that the carbon nanotube as the additive in the 10# machine oil contributed to significantly increase the fatigue life of the steel-steel pair. This was attributed to the ball bearing rolling effect of the carbon nanotube and its entrapment in the crack of the steel, which functioned to reduce the friction and restrain the crack propagation, respectively, and hence to improve the contact fatigue performance of the steel-steel pair. Moreover, the steel-steel pair had almost the same fatigue life under the lubrication of the base oil containing 1 wt.% or 3 wt.% carbon nanotubes, which might be related to the saturated adsorption of the nanotubes on the sliding steel surface or in the pit-corroded cracks of the steel surface.