Abstract:Thin-walled structures are widely used as crucial structural components for energy absorbing applications. To design lightweight thin-walled-involved composite structures with better mechanical performance remains an open issue. In this study, the X-shaped rib-reinforced foam-filled tubes were designed and tested under quasi-static axial compression. Two types of foams, i.e., the aluminum foam and the additively manufactured polylactide (PLA) foam were considered as lightweight fillers. The effects of foam block filling ratio (rib angle) and arrangement of different foam fillers on the axial crushing performance of the diagonally rib-reinforced foam block-filled tube were analyzed. Results indicated that tubes that were diagonally filled with PLA foam blocks possessed better energy absorption capacity, whereas the higher mean crushing strength was achieved by diagonally filling with two aluminum blocks. It also revealed that tubes filled with different foam blocks did not always show advantages over those filled with the same foams. Moreover, the diagonally aluminum foam blocks filled tubes with a large rib angle could induce the global buckling, whereas that with the rib angle of 120 degrees exhibited better mechanical properties in load consistency and specific energy absorption capacity. Numerical simulations were conducted to reveal the energy absorption enhancement mechanism of the tubes filled with varying combinations of the reinforced fillers. Results indicated that the interaction between the foam blocks and the reinforced rib contributed most to the increased energy absorption. Further, an analytical model for evaluating the crushing strength of the developed structure was proposed. The theoretical predictions are in good agreement with the experimental results. The idea of tailoring the fillers arrangement and assembling pattern would promote the development of optimal energy-absorbing thin-walled involved composite structures.

Energy-absorption Properties of Foam-Filled Circular Tubes Subjected to Dynamic Axial Crushing

Energy absorption characteristics of a foam-filled tri-tube under axial quasi-static loading: experiment and numerical simulation

Energy-absorbing mechanism and crashworthiness performance of thin-walled tubes diagonally filled with rib-reinforced foam blocks under axial crushing

Axial crushing of self-lock multi-cell tubes with foam filler and tube envelope

Axial crush behavior and energy absorption capability of foam-filled GFRP tubes manufactured through vacuum assisted resin infusion process

Axial crushing behaviors of metal density gradient foam-filled square taper tubes: Analytical model and numerical calculation

Crashworthiness design and enhanced energy absorption of multi-cell thin-walled circular tubes

Crushing and energy absorption of density-graded foam-filled square columns: Experimental and theoretical investigations

Braided-textile reinforced thin-walled conical tubular structures: Designing, manufacturing and testing

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Deformation and energy absorption properties of cenosphere/aluminum syntactic foam-filled circular tubes under lateral quasi-static compression

Foam-filled Lightweight Braided-Textile Reinforced and Nested Tubular Structures for Energy Absorption Applications

An investigation on the energy absorption characteristics of a multi-cell hexagonal tube under axial crushing loads

Energy absorption characteristics of a double-filled sinusoidal corrugated filled tube under axial impact

Deformation and energy absorption properties of cenosphere-aluminum syntactic foam-filled tubes under axial compression

On axial crushing behavior of double hat-shaped CFRP and GFRP structures

Energy-absorbing characteristics of hollow-cylindrical hierarchical honeycomb composite tubes under conditions of dynamic crushing

Study on energy absorption of paper honeycomb sandwich tube filled by polyethylene foam under axial loading

Expansion of Sandwich Tubes With Metal Foam Core Under Axial Compression

A numerical study on energy absorption capability of lateral corrugated composite tube under axial crushing

Dynamic Crushing Behavior of Random and Functionally Graded Metal Hollow Sphere Foams