Abstract:Thin-walled structures are widely used as crucial structural components for energy absorbing applications. To design lightweight thin-walled-involved composite structures with better mechanical performance remains an open issue. In this study, the X-shaped rib-reinforced foam-filled tubes were designed and tested under quasi-static axial compression. Two types of foams, i.e., the aluminum foam and the additively manufactured polylactide (PLA) foam were considered as lightweight fillers. The effects of foam block filling ratio (rib angle) and arrangement of different foam fillers on the axial crushing performance of the diagonally rib-reinforced foam block-filled tube were analyzed. Results indicated that tubes that were diagonally filled with PLA foam blocks possessed better energy absorption capacity, whereas the higher mean crushing strength was achieved by diagonally filling with two aluminum blocks. It also revealed that tubes filled with different foam blocks did not always show advantages over those filled with the same foams. Moreover, the diagonally aluminum foam blocks filled tubes with a large rib angle could induce the global buckling, whereas that with the rib angle of 120 degrees exhibited better mechanical properties in load consistency and specific energy absorption capacity. Numerical simulations were conducted to reveal the energy absorption enhancement mechanism of the tubes filled with varying combinations of the reinforced fillers. Results indicated that the interaction between the foam blocks and the reinforced rib contributed most to the increased energy absorption. Further, an analytical model for evaluating the crushing strength of the developed structure was proposed. The theoretical predictions are in good agreement with the experimental results. The idea of tailoring the fillers arrangement and assembling pattern would promote the development of optimal energy-absorbing thin-walled involved composite structures.

Foam-filled Lightweight Braided-Textile Reinforced and Nested Tubular Structures for Energy Absorption Applications

Braided-textile reinforced thin-walled conical tubular structures: Designing, manufacturing and testing

Fabrication and Crushing Behaviors of Braided-Textile Reinforced Tubular Structures

Manufacture of braided-textile reinforced multi-walled tubular structures and axial compression behaviors

Hierarchical Design, Manufacture and Crushing Behaviors of CFRP Tubular Energy Absorbers

Energy-absorbing mechanism and crashworthiness performance of thin-walled tubes diagonally filled with rib-reinforced foam blocks under axial crushing

Design of a novel multi-walled tube-reinforced aluminum foam for energy absorption

Axial crush behavior and energy absorption capability of foam-filled GFRP tubes manufactured through vacuum assisted resin infusion process

The mechanical characteristics of an aluminum foam winding CFRP composite structure under axial compression

Energy Absorbing Ability of Rectangular Self-Similar Multi-Cell Sandwich-Walled Tubular Structures

Influence of Extruded Tubing and Foam-Filler Material Pairing on the Energy Absorption of Composite AA6061/PVC Structures

Lateral crushing behavior of novel carbon fiber/epoxy composite bidirectional self-locked thin-walled tubular structure and system

Energy Absorption of Foam-Filled Multi-Cell Composite Panels under Quasi-Static Compression

Analysis of Energy Absorption Characteristics of Corrugated/Windowed Double-Tube Composite Structure Filled with Shear Thickening Fluid

Crashworthiness design and enhanced energy absorption of multi-cell thin-walled circular tubes

Axial crushing of self-lock multi-cell tubes with foam filler and tube envelope

Modular technique to construct lightweight CFRP lattice structures

Bio-inspired multi-cell tubular structures approaching ideal energy absorption performance

Axial compressive behavior and energy absorption of syntactic foam-filled GFRP tubes with lattice frame reinforcement

Fabricating sandwich composite tubes using a new thermal expansion technique: Materials preparation and energy absorption characteristics

Energy-absorbing characteristics of hollow-cylindrical hierarchical honeycomb composite tubes under conditions of dynamic crushing