Abstract:Thin-walled structures are widely used as crucial structural components for energy absorbing applications. To design lightweight thin-walled-involved composite structures with better mechanical performance remains an open issue. In this study, the X-shaped rib-reinforced foam-filled tubes were designed and tested under quasi-static axial compression. Two types of foams, i.e., the aluminum foam and the additively manufactured polylactide (PLA) foam were considered as lightweight fillers. The effects of foam block filling ratio (rib angle) and arrangement of different foam fillers on the axial crushing performance of the diagonally rib-reinforced foam block-filled tube were analyzed. Results indicated that tubes that were diagonally filled with PLA foam blocks possessed better energy absorption capacity, whereas the higher mean crushing strength was achieved by diagonally filling with two aluminum blocks. It also revealed that tubes filled with different foam blocks did not always show advantages over those filled with the same foams. Moreover, the diagonally aluminum foam blocks filled tubes with a large rib angle could induce the global buckling, whereas that with the rib angle of 120 degrees exhibited better mechanical properties in load consistency and specific energy absorption capacity. Numerical simulations were conducted to reveal the energy absorption enhancement mechanism of the tubes filled with varying combinations of the reinforced fillers. Results indicated that the interaction between the foam blocks and the reinforced rib contributed most to the increased energy absorption. Further, an analytical model for evaluating the crushing strength of the developed structure was proposed. The theoretical predictions are in good agreement with the experimental results. The idea of tailoring the fillers arrangement and assembling pattern would promote the development of optimal energy-absorbing thin-walled involved composite structures.

Fabrication and Crushing Behaviors of Braided-Textile Reinforced Tubular Structures

Manufacture of braided-textile reinforced multi-walled tubular structures and axial compression behaviors

Foam-filled Lightweight Braided-Textile Reinforced and Nested Tubular Structures for Energy Absorption Applications

Braided-textile reinforced thin-walled conical tubular structures: Designing, manufacturing and testing

Hierarchical Design, Manufacture and Crushing Behaviors of CFRP Tubular Energy Absorbers

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Modular technique to construct lightweight CFRP lattice structures

Zero-Poisson's-Ratio Honeycomb-Filled Braided Textile Reinforced Conical Tubes: Designing, Manufacturing and Testing

Crashworthiness design and enhanced energy absorption of multi-cell thin-walled circular tubes

Crushing responses and energy absorption behaviors of multi-cell CFRP tubes

Axial crush behavior and energy absorption capability of foam-filled GFRP tubes manufactured through vacuum assisted resin infusion process

Mechanical analysis and bionic improvement on buckling of CFRP tubes with high energy absorption capacity

Uniaxial Tensile Behavior of Anchored Carbon Fabric-Reinforced Cementitious Matrix Plates

Energy Absorbing Ability of Rectangular Self-Similar Multi-Cell Sandwich-Walled Tubular Structures

Lateral crushing behavior of novel carbon fiber/epoxy composite bidirectional self-locked thin-walled tubular structure and system

On Crashworthiness and Energy-Absorbing Mechanisms of Thick CFRP Structures for Railway Vehicles

Analysis of Energy Absorption Characteristics of Corrugated/Windowed Double-Tube Composite Structure Filled with Shear Thickening Fluid

Energy-absorbing mechanism and crashworthiness performance of thin-walled tubes diagonally filled with rib-reinforced foam blocks under axial crushing

Crash Energy Absorption of Braided Composite Tubes and its Application in Vehicle Passive Safety

Machine Learning Prediction of Mechanical Properties of Braided-Textile Reinforced Tubular Structures

Improvements in the lateral crushing behavior of syntactic foam‐filled glass fiber reinforced polymer tubes by the addition of straight and helical multiwalled carbon nanotubes