Abstract:Thin-walled structures are widely used as crucial structural components for energy absorbing applications. To design lightweight thin-walled-involved composite structures with better mechanical performance remains an open issue. In this study, the X-shaped rib-reinforced foam-filled tubes were designed and tested under quasi-static axial compression. Two types of foams, i.e., the aluminum foam and the additively manufactured polylactide (PLA) foam were considered as lightweight fillers. The effects of foam block filling ratio (rib angle) and arrangement of different foam fillers on the axial crushing performance of the diagonally rib-reinforced foam block-filled tube were analyzed. Results indicated that tubes that were diagonally filled with PLA foam blocks possessed better energy absorption capacity, whereas the higher mean crushing strength was achieved by diagonally filling with two aluminum blocks. It also revealed that tubes filled with different foam blocks did not always show advantages over those filled with the same foams. Moreover, the diagonally aluminum foam blocks filled tubes with a large rib angle could induce the global buckling, whereas that with the rib angle of 120 degrees exhibited better mechanical properties in load consistency and specific energy absorption capacity. Numerical simulations were conducted to reveal the energy absorption enhancement mechanism of the tubes filled with varying combinations of the reinforced fillers. Results indicated that the interaction between the foam blocks and the reinforced rib contributed most to the increased energy absorption. Further, an analytical model for evaluating the crushing strength of the developed structure was proposed. The theoretical predictions are in good agreement with the experimental results. The idea of tailoring the fillers arrangement and assembling pattern would promote the development of optimal energy-absorbing thin-walled involved composite structures.

Lateral crushing behavior of novel carbon fiber/epoxy composite bidirectional self-locked thin-walled tubular structure and system

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Energy-absorbing characteristics of hollow-cylindrical hierarchical honeycomb composite tubes under conditions of dynamic crushing

Foam-filled Lightweight Braided-Textile Reinforced and Nested Tubular Structures for Energy Absorption Applications

Crashworthiness design and enhanced energy absorption of multi-cell thin-walled circular tubes

On axial crushing behavior of double hat-shaped CFRP and GFRP structures

Braided-textile reinforced thin-walled conical tubular structures: Designing, manufacturing and testing

Fabrication and Crushing Behaviors of Braided-Textile Reinforced Tubular Structures

Manufacture of braided-textile reinforced multi-walled tubular structures and axial compression behaviors

Crashworthiness design of bionic-shell thin-walled tube under axial impact

Mechanical analysis and bionic improvement on buckling of CFRP tubes with high energy absorption capacity

Crushing responses and energy absorption behaviors of multi-cell CFRP tubes

Axial crushing of self-lock multi-cell tubes with foam filler and tube envelope

Crashworthiness optimization of a sandwich tube filled with CFRP sinusoidal corrugated board

On Crashworthiness and Energy-Absorbing Mechanisms of Thick CFRP Structures for Railway Vehicles

Axial Crushing and Energy Absorption Integrated Design of Modular Filled Double-Hat Beam Composite Structures

Improvements in the lateral crushing behavior of syntactic foam‐filled glass fiber reinforced polymer tubes by the addition of straight and helical multiwalled carbon nanotubes

Energy-absorbing mechanism and crashworthiness performance of thin-walled tubes diagonally filled with rib-reinforced foam blocks under axial crushing

Crash resistance analysis and optimization of sponge like thin-walled pipes under multiple working conditions

Research on energy-absorption and failure of carbon fiber reinforced epoxy resins double cone structure

A comparative study on energy absorption of flat sides and corner elements in CFRP square tube under axial compression