Abstract:Monte Carlo based GEANT4 simulations have been carried out to estimate the efficiency (<math>η</math>) of thermal neutron detection with boric acid (H3BO3) as a converter material. Different geometries of detector configurations — planar stack, sphere, cylinder and cuboid were considered and their efficiency were computed for relevant geometric parameters along with different 10B enrichment (<math>BE</math>) levels content in boric acid, with Low Level Discriminator (LLD) value fixed at 300 keV. The planar stack configuration detector was designed by replicating two dimensional detector units (DUs) – each consisting of boric acid as a converter material and Silicon (Si) as a detector material – in the third dimension. The simulation carried out for varied layer thicknesses (<math>0.25μm</math> to <math>10μm</math>) of boric acid showed that efficiency (<math>η</math>) increased with increasing thickness, reached a maximum at a critical thickness (<math>tsc</math>) and thereafter found to decrease. Typically, at a critical thickness of <math>∼</math>3.5<math>μm</math>, the <math>η</math> for 100% <math>BE</math> content in boric acid was found to be 15.96% for 30 DUs. For the case of sphere, cylinder and cuboid of boric acid embedded in Si, the simulations were performed for diameter and width both varying from <math>0.5μm</math> to <math>9.5μm</math> in steps of <math>0.5μm</math>. In particular for cylinder and cuboid geometries, the depth was also varied from <math>25μm</math> to <math>275μm</math> with a step size of <math>25μm</math>. In all these configurations <math>η</math> was found to increase initially and was maximum at a critical diameter and width of <math>∼</math>8–9<math>μm</math>, and thereafter it was found to reduce. Apart from the simulated <math>η</math> estimation, histogram plots depicting the energy deposited in Si detector region by the generated charged particles (7Li <math>=</math> 0.839 MeV and <math>α=1.47MeV</math>) upon thermal neutron interaction in boric acid have also been studied for various geometrical parameters such as thickness, diameter and width of detector.

Boron Neutron-Gamma Logging with an Am/Be Source

Use of Boron As A Tracer for Recycled Water in Brackish Aquifers

Improving the accuracy of CO 2 sequestration monitoring in depleted gas reservoirs using the pulsed neutron-gamma logging technique

A new method for calculating bulk density in pulsed neutron-gamma density logging

Analyzing the neutron and $γ$-ray emission properties of an americium-beryllium tagged neutron source

Simulation study on the radioactive logging responses in the spiral borehole

Calculation of Porosity and CO2 Content in CO2-Bearing Gas Formations Based on Density and Neutron Logging Forward and Inverse Methods

First Application of LWD NMR and Quadrupole Sonic Measurements Derived Formation Evaluation in a Carbonate Reservoir in Sichuan Basin, China

Experimental study of the influence of borehole parameters on prompt fission neutron uranium logging and its corrections

Simulations of absolute porosity measurements by compensated neutron logging tools mounted with stilbene or CLYC scintillators

Simulation of gas-water identification in sandstone hydrogen reservoirs based on pulsed neutron logging

A new Am-Be PGNAA setup for element determination in aqueous solution

Development of an innovative external (in air) Particle Induced Gamma-ray Emission method for rapid non-destructive determination of isotopic composition of boron in "As received" boron based ceramic neutron absorbers

Natural gamma-ray logging in the main hole (100-2000 m) of the Chinese Continental Scientific Drilling Project and its significance

The 4.438MeV gamma to neutron ratio for the Am–Be neutron source

Application of Associated Particle C/O Well Logging

A qualitative characteristic scheme and a fast distance prediction method of multi-probe azimuthal gamma-ray logging in geosteering

Effect of saturated brine with high concentration on nuclear magnetic resonance (NMR) data in high-porosity sandstone reservoirs

Characterization Of~7li(p,n)~7be Neutron Yields from an Accelerator for Boron Neutron Capture Therapy

Simulation of multi-angle fractured uranium deposits by neutron logging

Boric acid as converter material for semiconductor neutron detector- A GEANT4 simulation study