Abstract:Recent decades have seen a growing concern about ever-increasing green house gas (GHG) emissions and depletion of fossil fuels. Polygeneration, a multi-input multi-output energy system, provides huge opportunities to tackle these problems due to its superior performances over conventional energy systems in terms of energy conversion efficiency and GHG emissions. Many approaches have been made in process design and analysis of polygeneration energy systems, but most of them focus on using coal gasification as the only way to provide gas for downstream utilization. Coke oven gas, another gas source with huge capacity, however, has not received enough attention in polygeneration process design, and researches in this field are still rather limited. In this paper, we present a dual-gas sourced polygeneration process design which uses both gasification gas and coke oven gas and produces methanol, dimethyl ether (DME), and dimethyl carbonate (DMC) in an integrated catalysis procedure. Gasification gas and coke oven gas are converted to synthesis gas, or syngas, via a catalytic reforming procedure, where the ratio between carbon monoxide and hydrogen in the syngas is carefully adjusted according to specific requirements of downstream chemical synthesis reactions. An integrated catalysis procedure follows, where DME is synthesized from the fresh syngas first, unconverted syngas is then sent to a methanol synthesis unit to produce methanol, and part of the methanol is further converted to DMC in a DMC synthesis unit. Based on the proposed process design, an exergoeconomic analysis and an exergy cost distribution diagram are presented, from which the production cost of a product over each functional block of the process can be easily obtained. Analysis results show that the largest exergy loss occurs in an exothermic reformer, accounting 60.4 percent of the total exergy loss. The exergy cost distribution diagram indicates that DMC has the highest exergy cost, followed by DME and methanol, and it is economically favorable to use the exhaust gas from the chemical synthesis block for power generation.

Effect of Methanol Synthesis Ratio on a Polygeneration System

Energy Consumption Performance of Methanol/Electricity Cogeneration Systems

Exergy Analysis of Methanol-Igcc Polygeneration Technology Based on Coal Gasification

Dynamic-cycle Simulation of Power-to-methanol-to-power System with Reversible Solid Oxide Cells: Multi-physics and Techno-Economic Analysis

EFFECT OF GASIFYING AGENT MIXING RATIO ON POLYGENERATION SYSTEM GASIFIER PERFORMANCE

Design and Optimization of Methanol-Power Polygeneration Based on Coal Gas and Coke-Oven Gas

Techno-Economic Analysis of Methanol to Propylene Process

Techno-economic Analysis of Methanol and Electricity Poly-Generation System Based on Coal Partial Gasification

Exergy analysis of a typical polygeneration system

Analysis of the Polygeneration System of Methanol and Electricity Based on Coal Gasification (2)

Energy and Exergy Analysis of Poly-Generation System of Hydrogen and Electricity Via Coal Partial Gasification

The Impact of System Configuration on Material Utilization in the Coal-Based Polygeneration of Methanol and Electricity

Co2 Mitigation in Coal Gasification Cogeneration Systems with Integration of the Shift Reaction, Co2 Absorption and Methanol Production

Assessment of methanol and electricity co-production plants based on coke oven gas and blast furnace gas utilization

Study on Off-design Performance of Series Polygeneration System with Liquid Phase Methanol Synthesis

Exergy Analysis of Coal-Based Series Polygeneration Systems for Methanol and Electricity Co-Production

A dual-gas sourced integrated methanol/DME/DMC catalysis approach to polygeneration energy systems design and an exergoeconomic analysis

Design and Analysis of a New Dimethyl Ether- Electric Power Polygeneration System

A Study of Methanol Synthesis,Distillation Simulation and Load Variation of a Methanol/Power Cogeneration System

A novel structure of natural gas, electricity, and methanol production using a combined reforming cycle: Integration of biogas upgrading, liquefied natural gas re-gasification, power plant, and methanol synthesis unit

A multi-objective optimization approach to polygeneration energy systems design