Abstract:The design of the active RC integrator presented in this research utilizes a fully balanced technique and current-tunable frequencies to create the active RC integrator and reliable circuit. The circuit is made up of six npn bipolar junction transistors (BJT), six resistors (R), and a capacitor (C), with the fully balanced technique used to make the circuit structure uncomplicated and symmetrical with signal differencing. This approach results in a low number of internal devices in the circuit, making it an attractive option for integrated circuit (IC) development. One of the key features of the fully balanced current-tunable active RC integrator is its ability to be frequency-tunable with bias current (If). This feature enables the circuit to be used in a variety of applications, including filter circuits, communication signal generators, instrumentation signal generators, and various automatic controls. The fully balanced design also ensures that the circuit is stable and robust, even in the presence of device parameter variations. To evaluate the performance of the active RC integrator, simulations were conducted using Pspice. The results show that a fully current-tunable active RC integrator can be precisely tuned with the active bias to a value consistent with the theoretically calculated value. This demonstrates the efficiency and reliability of the circuit design and simulation method. The Monte Carlo (MC) method was also used to analyze the circuit performance in cases where the resistor (R) and capacitor (C) device had a 10 percent error and the transistor gain (β) was set to an error of 50 percent. The MC analysis showed that the phase shift (degree) and magnitude (dB) of the circuit were stable, and the circuit's performance was not significantly impacted by the device parameter variations. This further demonstrates the robustness and versatility of the fully balanced current-tunable active RC integrator design. Finally, harmonic distortion was evaluated to confirm the performance of the designed and developed fully balanced current-tunable active RC integrator. The results showed low levels of harmonic distortion, which indicates that the circuit is suitable for high-performance applications that require low distortion

Frequency Limitations of Log-Domain Current-Mode Bandpass Filters

Analysis and Improvement of Log-Domain Integrators Based on Transistor Nonidealities

Design of Low-Voltage Differential Log-Domain Integrator Based on BiCMOS

A Higher Order Filter Based on Balanced Log-Domain Integrator

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

A 1.3–1.7-Ghz $Q$ -Enhanced Resonator-Based High-IF Bandpass Filter with 1.5%–67% Tunable Fractional Bandwidth in 65-Nm CMOS Process

A New Wide Stopband Microstrip Bandpass Filter with Miniaturized Interdigital Capacitor Resonator

Analysis of the Low Power Efficiency for Low Voltage Log - Domain Filters

On realization of current-mode continuous time current mirror biintegrator filters

EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes

On realization of current mode continuous time current mirror biintegrator filters

Realizability Analysis of Wideband Non-Equiripple Bandpass Filters Using Parallel-Coupled Lines

The design of a fully balanced current–tunable active RC integrator

Tunable Balanced Bandpass Filter with Constant Absolute Bandwidth and High Common Mode Suppression

Effects of distributed capacitance on CCLL based MOSFET-C integrated continuous-time bandpass filter

Frequency Response Analysis and Design Rules for Capacitive Feedback Transimpedance Amplifier

Modeling of On-Chip Rf Passive Components

Balanced Bandpass Filter with Reconfigurable Frequency and Bandwidth Based on Multi-Mode Resonator

Design of a bandpass differentiator based on network synthesis methods

Modeling and Performance Improvement of Fractional-Order Band-Pass Filter Using Fractional Elements

Design of Active Band Pass Filter