Abstract:Three-dimensional (3D) integration technology using Cu interconnections has emerged as a promising solution to improve the performance of silicon microelectronic devices. However, Cu diffuses into SiO2 and requires a barrier layer such as Ta to ensure acceptable reliability. In this paper, the effects of temperature and strain normal to the interface on the inter-diffusion of Cu and Ta at annealing conditions are investigated using a molecular dynamics (MD) technique with embedded atomic method (EAM) potentials. Under thermal annealing conditions without strain, it is found that a Cu-rich diffusion region approximately 2 nm thick is formed at 1000 K after 10 ns of annealing. Ta is capable of diffusing into the interior of Cu but Cu hardly diffuses into the inner lattice of Ta. At the Cu side near the interface an amorphous structure is formed due to the process of diffusion. The diffusion activation energy of Cu and Ta are found to be 0.9769 and 0.586 eV, respectively. However, when a strain is applied, a large number of crystal defects are generated in the sample. As the strain is increased, extrinsic stacking faults (ESFs) and lots of Shockley partial dislocations appear. The density of the dislocations and the diffusion channels increase, promoting the diffusion of Cu atoms into the inner lattice of Ta. The thickness of the diffusion layer increases to 4 times the value when only a temperature load of 700 K is applied. The MD simulations demonstrated that Ta is very effective as a barrier layer under thermal loading only, and its effectiveness is impaired by tensile strain at the Cu/Ta interface. The simulations also clarified the mechanism that caused the impairment. The methodology and approach described in this paper can be followed further to study the effectiveness of barrier layers under various annealing and strain conditions, and to determine the minimum thickness of barrier layers required for a particular application.

Reaction of the SiO2/Ta Interface and Its Influence on Cu Diffusion

Interface Reaction of SiO2/Ta and Its Influence on Cu Diffusion

Study on interface behavior of Be/CuCrZr alloy by diffusion bonding

Microstructure Optimization and Optical and Interfacial Properties Modulation of Sputtering-Derived Hfo2 Thin Films by Tio2 Incorporation

Properties of Ta Film as Diffusion Barrier in the Copper Metallization

Diffusion behavior of Cu/Ta heterogeneous interface under high temperature and high strain: An atomistic investigation

XPS characterization of interfacial reaction between SiCOH low-k dielectric and TaN barrier layer

A Study of Interface Diffusion and Reaction of Ti/ZrN2/Si Film

Interfacial Structure of Ta_2O_5/Si Film and Photoactivity

Interface diffusion and reaction between Ti layer and Si3N4/Si substrate

Effects of Electric Field Annealing on the Interface Diffusion of Cu/Ta/Si Stacks

Cu contact on NiSi substrate with a Ta/TaN barrier stack

Ru/TaSiN with different Ta/Si atomic ratio as barrier for Cu contact on NiSi substrate

Interface diffusion and reaction between Ti layer and Si<sub>3</sub>N<sub>4</sub>/Si substrate

First-principles investigation of Cu/Ti-TM/Si (TM=W, Ru) interfaces: Role of Ti-TM binary alloys as diffusion barrier layers

Study on microstructure, optical and tribological properties of self-formed Ta oxide films

Improved diffusion barrier properties and NiSi thermal stability for the Cu contact with the Ru/TaSiN stack on NiSi/Si

High-Temperature Ta Diffusion in the Grain Boundary of Thin Cu Films

The electronic structures of TiO2/Ti4O7, Ta2O5/TaO2 interfaces and the interfacial effects of dopants

Displacement Activation of Tantalum Diffusion Barrier Layer for Electroless Copper Deposition

The diffusion behavior of Pt/Ti electrode and its effect on ferroelectric thin films