Abstract:Three-dimensional (3D) integration technology using Cu interconnections has emerged as a promising solution to improve the performance of silicon microelectronic devices. However, Cu diffuses into SiO2 and requires a barrier layer such as Ta to ensure acceptable reliability. In this paper, the effects of temperature and strain normal to the interface on the inter-diffusion of Cu and Ta at annealing conditions are investigated using a molecular dynamics (MD) technique with embedded atomic method (EAM) potentials. Under thermal annealing conditions without strain, it is found that a Cu-rich diffusion region approximately 2 nm thick is formed at 1000 K after 10 ns of annealing. Ta is capable of diffusing into the interior of Cu but Cu hardly diffuses into the inner lattice of Ta. At the Cu side near the interface an amorphous structure is formed due to the process of diffusion. The diffusion activation energy of Cu and Ta are found to be 0.9769 and 0.586 eV, respectively. However, when a strain is applied, a large number of crystal defects are generated in the sample. As the strain is increased, extrinsic stacking faults (ESFs) and lots of Shockley partial dislocations appear. The density of the dislocations and the diffusion channels increase, promoting the diffusion of Cu atoms into the inner lattice of Ta. The thickness of the diffusion layer increases to 4 times the value when only a temperature load of 700 K is applied. The MD simulations demonstrated that Ta is very effective as a barrier layer under thermal loading only, and its effectiveness is impaired by tensile strain at the Cu/Ta interface. The simulations also clarified the mechanism that caused the impairment. The methodology and approach described in this paper can be followed further to study the effectiveness of barrier layers under various annealing and strain conditions, and to determine the minimum thickness of barrier layers required for a particular application.

Interface Reaction of SiO2/Ta and Its Influence on Cu Diffusion

Reaction of the SiO2/Ta Interface and Its Influence on Cu Diffusion

Study on interface behavior of Be/CuCrZr alloy by diffusion bonding

Ru/TaSiN with different Ta/Si atomic ratio as barrier for Cu contact on NiSi substrate

Diffusion behavior of Cu/Ta heterogeneous interface under high temperature and high strain: An atomistic investigation

Cu contact on NiSi substrate with a Ta/TaN barrier stack

Properties of Ta Film as Diffusion Barrier in the Copper Metallization

TaN Diffusion Barrier Layers Deposited by Reactive Magnetron Sputtering

Interface diffusion and reaction between Ti layer and Si3N4/Si substrate

XPS characterization of interfacial reaction between SiCOH low-k dielectric and TaN barrier layer

Tan/Ta As an Effective Diffusion Barrier for Direct Contact of Copper and Nisi

Improved diffusion barrier properties and NiSi thermal stability for the Cu contact with the Ru/TaSiN stack on NiSi/Si

COMPARATIVE STUDY OF IONIZED METAL PLASMA Ta, TaN AND MULTISTACKED Ta/TaN STRUCTURE AS DIFFUSION BARRIERS FOR Cu METALLIZATION

A Study of Interface Diffusion and Reaction of Ti/ZrN2/Si Film

Interface Stability and Microstructure of an Ultrathin Α-Ta/graded Ta(N)/TaN Multilayer Diffusion Barrier

Interface diffusion and reaction between Ti layer and Si<sub>3</sub>N<sub>4</sub>/Si substrate

Effects of Electric Field Annealing on the Interface Diffusion of Cu/Ta/Si Stacks

Interfacial Structure of Ta_2O_5/Si Film and Photoactivity

Performance of RF Sputtering Deposited TaN as the Diffusion Barrier of Cu Interconnection

Diffusion Barrier Performance of Reactively Sputtered Ta–W–N Between Cu and Si

Diffusion Barrier Effect of Ta/Ti Bilayer in Organic Dielectric/cu Interconnects