Abstract:A coarse-grained computational fluid dynamics coupled with the discrete element method (CFD-DEM) model, combined with a smoothed voidage algorithm and a multicomponent and multistep pyrolysis scheme, has been developed, validated, and used to study biomass pyrolysis in different-shaped fluidized-bed reactors. Correspondingly, fluidized-bed reactors with three different section shapes (i.e., circular, square, and rectangular sections) and gas inlet areas (i.e., 25, 50, and 100% of the bottom section) were devised to explore the effect of the reactor structure on pyrolysis behavior. The simulation results have been extensively analyzed and discussed by various indicators, such as the gas-solid flow patterns, bubble behaviors, pyrolysis product species, biomass reaction rates, and reactor wall erosion depths. It is found that the circular reactor has the largest mean bed height but the lowest fluctuation frequency. Moreover, the circular reactor generally has the largest bubble equivalent diameter at the same height, followed by the square reactor, and the rectangular reactor provides the smallest bubbles. Regarding the effect of the gas inlet area, the fluctuation frequency monotonically increases with reducing the gas inlet area. The largest gas inlet gives the lowest biomass mass loss rate and the smallest bubble equivalent diameter, whereas the other two smaller gas inlets provide quite similar results. Moreover, decreasing the gas inlet area also generates large bubbles more frequently. Finally, the circular reactor suffers the severest wear, followed by the square and the rectangular reactors. These findings are helpful in optimizing the design and operation of biomass fluidized-bed pyrolysis processes.

Recycling-Flow Characteristic Of Quartz Sand Mixed With Sawdust In A Conduit-Spouting Fluidized Bed Reactor

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Flow Characteristics Of Rdf And Sand Mixture In A Spouting-Moving Bed

Preparation Of Liquid Fuel Through Pyrolysis Of Biomass In A Conduit-Spouting Fluidized Reactor

EXPERIMENTAL STUDY ON PARTICLE FLOW CHARACTERISTICS IN A CLAPBOARD-TYPE INTERNAL CIRCULATING FLUIDIZED BED REACTOR

Impact of the Reactor Structure on Biomass Pyrolysis in Fluidized-Bed Reactors: A Coarse-Grained CFD-DEM Study

Flow Characteristics of Mixed Particles with a Simulated Cold State in Moving Bed Reactor

Bed energy dissipation rate of super-high-rate anaerobic bioreactor

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Preparation of Liquid Fuel Through Fast Pyrolysis of Biomass in a Spout-fluidized Reactor with a Draft Tube

Fluidization of Sawdust in a Cold Model Circulating Fluidized Bed: Experimental Study

Numerical study of the biomass pyrolysis process in a spouted bed reactor through computational fluid dynamics

Model analysis of gas/solid flow behavior in standpipe of CFB combined with a pyrolysis reactor

Cold Simulation Analysis of Flow Characteristics of High-Temperature Mixture in a Moving-Bed Reactor

Pyrolysis and combustion of refuse-derived fuels in a spouting-moving bed reactor

Fluid′s Flowing Characteristics in Forced Inner Recycling Reactor

Analysis of the Fluidization Characteristics of the Sand and Biomass Mixture

Fluid Dynamics Investigation in a Cold Flow Model of Internal Recycle Quadruple Fluidized Bed Coal Pyrolyzer

Reactive MP-PIC investigation of heat and mass transfer behaviors during the biomass pyrolysis in a fluidized bed reactor

Research on Minimum Fluidization Velocity of Mixture of Pelletized Biomass and Sands

The Influence of Inert Additives and Recycling Raw Gas on Biomass Gasification in A Fluidized Bed Gasifier