Abstract:Carbon nanotubes (CNTs) have exhibited immense potential for applications in biology and medicine, and once their intended purpose is fulfilled, the elimination of residual CNTs is essential to avoid negative effects. In this study, we demonstrated the effective collection and simple removal of CNTs dispersed in a suspension via thermal convection. First, a tapered fiber tip with a cone angle and end diameter of 10° and 3 μm, respectively, was fabricated via a heating and pulling method. Further, a laser beam with a power and wavelength of 100 mW and 1.55 μm, respectively, was launched into the tapered fiber tip, which was placed in a CNT suspension, resulting in the formation of a microbubble on the fiber tip. The temperature gradient on the microbubble and suspension surface induced thermal convection in the suspension, which resulted in the accumulation of CNTs on the fiber tip. The experimentally formed CNT cluster possessed a circular top surface with a diameter of 87 μm and an arched cross-section with a height of 19 μm. Furthermore, this CNT cluster was firmly attached to the fiber tip. Therefore, the removal of CNT clusters can be realized by simply removing the fiber tip from the suspension. Moreover, we simulated the thermal convection that caused CNT aggregation. The obtained results indicate that convection near the fiber tip flows toward it, which pushes the CNTs toward the fiber tip and enables their attachment to it. Further, the flow velocity is symmetrically distributed as a Gaussian function, which results in the formation of a circular top surface and arched cross-sectional profile for the CNT cluster. Our method may be applied in biomedicine for the collection and removal of nano-drug residues.

Breaking and Flocculating Purification of Thin-Long Carbon Nanotubes from Carbon Fibers

Transferable thin films of pristine carbon nanotubes.

Efficient Purification Of Single-Walled Carbon Nanotube Fibers By Instantaneous Current Injection And Acid Washing

High-strength carbon nanotube fibers with near 100% purity acquired via isothermal vacuum annealing

Freon-CO2-assisted purification of single-walled carbon nanotubes

A Treatment Method to Give Separated Multi-Walled Carbon Nanotubes with High Purity, High Crystallization and a Large Aspect Ratio

Purification and characterization of single-walled carbon nanotubes produced by arc-discharge

Electrophoretic analysis and purification of fluorescent single-walled carbon nanotube fragments.

Purification and length separation of single-walled carbon nanotubes using chromatographic method

Centrifugal purification of chemically modified single-walled carbon nanotubes

High-Strength Carbon Nanotube Fibers from Purity Control by Atomized Catalytic Pyrolysis and Alignment Improvement by Continuous Large Prestraining

Purification and Preliminary Modification of Multi-walled Carbon Nanotubes

Single-Walled Carbon Nanotube Sample Purification

Purification of multiwalled carbon nanotubes by annealing and extraction based on the difference in van der Waals potential.

Light-induced Thermal Convection for Collection and Removal of Carbon Nanotubes

Pre-Treatment And Liquid-Phase Fabrication Of Carbon Nanotube Films

Purification of multi-walled carbon nanotubes and its surface modification

Co-synthesis of Single-Walled Carbon Nanotubes and Carbon Fibers

Purification of Single-Walled Carbon Nanotubes by a Highly Efficient and Nondestructive Approach

Purification of single-walled carbon nanotubes

Preparation of short and water-dispersible carbon nanotubes by solid-state cutting