Abstract:A process of non-destructive purification of carbon nanotubes (CNTs) was discussed. CNTs samples were produced by a catalytic chemical vapor deposition method, which have defects along the graphite tube walls and include impurities, such as catalyst particles, amorphous carbon, carbon nanoparticles, etc. Taking advantage of the fact that different structure and thermal oxidation rates exist between CNTs and other carbonaceous particles, samples were annealed at 1800 degrees C for 3 h in art Ar protective atmosphere. The morphologies of the as-received and high-temperature annealed samples were characterized by scanning electron microscopy. Most of CNTs cap were opened, which were, in agreement with transmission electron microscopy observation. The elemental compositions of the specimens were identified by energy dispersive spectrometry. As-received sample impurities such as Al, Si, Ni and Cu (their mass fraction values were 4.67%, 0.27%, 40.12% and 1.34%, respectively) were efficiently removed. The purity and the graphitization were determined by Raman spectroscopy. After the annealing, the area of the D-line peak and the G-line peak decreased from 1314900 to 474921 and from 767157 to 566292, respectively. The intensity of D-line peak decreased, while that of G-line peak increased., These results imply that some defects have been healed. The purity and the graphitization of annealed CNTs are high. High-temperature annealing has been confirmed as an effective means of removing both the catalyst particles and microstructures defects within nanotubes.

Purification of multiwalled carbon nanotubes by annealing and extraction based on the difference in van der Waals potential.

Purification and Preliminary Modification of Multi-walled Carbon Nanotubes

Microwave Purification of Multi-Wall Carbon Nanotubes in Gas Phase

Purification and characterization of single-walled carbon nanotubes produced by arc-discharge

99.9% Purity Multi-Walled Carbon Nanotubes by Vacuum High-Temperature Annealing

Mild purification of multiwalled carbon nanotubes with increased selectivity for carbon impurity and residual metal removal

Purification of multi-walled carbon nanotubes and its surface modification

Purification of Single-Walled Carbon Nanotubes by a Highly Efficient and Nondestructive Approach

Purification of single-walled carbon nanotubes

One-step process for non-destructive purification of carbon nanotubes by high-temperature annealing

Effective purification of single-walled carbon nanotubes with reversible noncovalent functionalization.

Purification of Multi Walled Carbon Nanotubes (Mwcnts) Synthesized by Arc Discharge Set Up

Study on the purifying of carbon nanotubes

A Treatment Method to Give Separated Multi-Walled Carbon Nanotubes with High Purity, High Crystallization and a Large Aspect Ratio

Freon-CO2-assisted purification of single-walled carbon nanotubes

Microwave Purification of Large-Area Horizontally Aligned Arrays of Single-Walled Carbon Nanotubes

An Integrated Route for Purification, Cutting and Dispersion of Single-Walled Carbon Nanotubes

High-Yield, Nondestructive Purification and Quantification Method for Multiwalled Carbon Nanotubes

Effective Purification of SWNTs Based on Combined Method

Purification of Single-Wall Carbon Nanotubes

Study on the surface purification modification treating of multi-wall carbon nano-tubes(MW-CNTs)