Abstract:Nano, Ahead of Print. This research work describes the cost-effective synthesis and purification of multiwall carbon nanotubes (MWCNTs). Synthesis of CNTs was carried out in distilled water between two electrodes using the electric arc discharge (EAD) method. EAD is a simple and straightforward route in which an electric arc is generated between graphite electrodes through DC power source to produce soot which contains MWCNTs along with impurities. The deposited soot containing MWCNTs was then chipped off and purified. In this case, multistep purification scheme was opted to remove unwanted impurities from produced MWCNTs. Purification route comprised thermal treatment, chemical treatment and a combination of both to yield pure MWCNTs. Thermal treatments were carried out in normal air and under controlled flow of oxygen at different temperatures whereas chemical treatment was performed using acidic solution. Thermo gravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) were carried out before and after purification treatments to investigate the outcome of employed treatments. Results showed that the thermal or chemical treatment alone is not sufficient to remove impurities from soot. Moreover, the introduction of an oxide group through chemical treatment reduces the oxidization temperature of graphitic particles. It was found that the chemical treatment followed by thermal annealing under the controlled flow of oxygen is the most appropriate method for successful purification of MWCNTs synthesized via EAD method.

Purification and Preliminary Modification of Multi-walled Carbon Nanotubes

Purification of multi-walled carbon nanotubes and its surface modification

Purification of multiwalled carbon nanotubes by annealing and extraction based on the difference in van der Waals potential.

Purification and characterization of single-walled carbon nanotubes produced by arc-discharge

Water-Assisted Preparation of High-Purity Semiconducting (14,4) Carbon Nanotubes

Mild purification of multiwalled carbon nanotubes with increased selectivity for carbon impurity and residual metal removal

Purification of Single-Wall Carbon Nanotubes

Purification of single-walled carbon nanotubes

99.9% Purity Multi-Walled Carbon Nanotubes by Vacuum High-Temperature Annealing

Purification of Cvd Synthesized Single-Wall Carbon Nanotubes by Different Acid Oxidation Treatments

Single-walled carbon nanotubes: synthesis and quantitative purification evaluation by acid/base treatment for high carbon impurity elimination

Purification and Characterization of Single-Walled Carbon Nanotubes Synthesized by Chemical Vapor Deposition

Freon-CO2-assisted purification of single-walled carbon nanotubes

Purification of Multi Walled Carbon Nanotubes (Mwcnts) Synthesized by Arc Discharge Set Up

Purification, Property and Application of Carbon Nanotube

An Efficient Strategy for the Purification of Cloth-Like Single Walled Carbon Nanotube Soot Produced by Arc Discharge

A Treatment Method to Give Separated Multi-Walled Carbon Nanotubes with High Purity, High Crystallization and a Large Aspect Ratio

Microwave Purification of Large-Area Horizontally Aligned Arrays of Single-Walled Carbon Nanotubes

Purifying Double-Walled Carbon Nanotubes by Vacuum High-Temperature Treatment

Hydrothermal treatment to prepare hydroxyl group modified multi-walled carbon nanotubes

Arc Discharge Synthesis and Multistep Purification of Multiwall Carbon Nanotubes