Abstract:Single-walled carbon nanotubes (SWNTs) are promising nanomaterials for incorporation into organic electronic devices (OEDs), with the potential to fabricate flexible devices while exploiting inexpensive solution-processing techniques. As-synthesized SWNTs are insoluble and comprised of a mixture of metallic and semiconducting SWNTs (sc-SWNTs), necessitating dispersal and purification before integration into OEDs. Refinement of conjugated polymer extraction techniques has allowed for the isolation of sc-SWNTs from metallic in a reproducible and scalable manner. The availability of highly-pure sc-SWNT materials has facilitated the production of thin-film transistors (TFTs) with very high charge carrier mobilities, outperforming organic small molecule and polymer semiconductors. However, the realization of commercial OED applications of polymer-sorted sc-SWNTs have not yet been achieved, partially due to the prohibitive time and materials costs associated with purifying sc-SWNTs. Current protocols for dispersing sc-SWNTs with conjugated polymers involve three broad steps: (1) dispersion of bulk SWNT material, (2) removal of non-dispersed carbonaceous materials, and (3) removal of excess polymer through filtration or centrifugation. The final step of removal of excess polymer is time-consuming and wasteful, but viewed as necessary for preparing high-performing TFTs, as the conjugated polymer has much lower performance compared to SWNTs. In this study we performed the first systematic investigation of the effect of excess polymer on SWNT TFT performance. Three SWNT concentrations were investigated, with varying ratios of excess polymer added to each. TFT device performance was monitored using several metrics, including: mobility, threshold voltage, on/off ratios and hysteresis. Characterization of large numbers of replicate TFT devices determined that below a threshold amount of excess polymer the presence of excess polymer did not have a negative impact on device performance. Detailed analysis of the sc-SWNT films through Raman spectroscopy and atomic force microscopy (AFM) confirmed that a simple rinsing step was sufficient to remove all the unbound conjugated polymer from the substrate surface without affecting the sc-SWNT network. The volume of solvent required for the rinsing step was substantially lower than that required for filtration or centrifugation steps. Furthermore, at higher SWNT concentrations the excess polymer prevented nanotube bundling, resulting in moderate improvements in both mobility and on/off ratios. Our results were reproducible for two different conjugated polymer sc-SWNT systems, demonstrating the versatility of this procedure.

Enhanced Process Integration and Device Performance of Carbon Nanotubes Via Flocculation

Improving the Performance of Aligned Carbon Nanotube-Based Transistors by Refreshing the Substrate Surface.

Polymer Coating Enabled Carrier Modulation for Single-Walled Carbon Nanotube Network Inverters and Antiambipolar Transistors

Nano-engineering Thermal Transport Performance of Carbon Nanotube Networks with Polymer Intercalation: a Molecular Dynamics Study.

High-yield sorting of small-diameter carbon nanotubes for solar cells and transistors

Engineering Supramolecular Polymer Conformation for Efficient Carbon Nanotube Sorting

Solvent Effects on Polymer Sorting of Carbon Nanotubes with Applications in Printed Electronics.

Recycling Strategy for Fabricating Low-Cost and High-Performance Carbon Nanotube TFT Devices.

Universal Selective Dispersion of Semiconducting Carbon Nanotubes from Commercial Sources Using a Supramolecular Polymer.

Influence of Excess Conjugated Wrapping Polymer in Semiconducting Single-Walled Carbon Nanotube Dispersions

Degradable Fluorene- and Carbazole-Based Copolymers for Selective Extraction of Semiconducting Single-Walled Carbon Nanotubes

Rapid annealing and cooling induced surface cleaning of semiconducting carbon nanotubes for high-performance thin-film transistors

Dispersion of High-Purity Semiconducting Arc-Discharged Carbon Nanotubes Using Backbone Engineered Diketopyrrolopyrrole (Dpp)-Based Polymers

Breaking and Flocculating Purification of Thin-Long Carbon Nanotubes from Carbon Fibers

Solution processed high performance thin-film transistors using polymer/SWCNT composite ink

Achieving High-Performance Polymer-Wrapper-Free Aligned Carbon Nanotube Field-Effect Transistors Through Degradable Polymer Wrapping and Efficient Removal Techniques

Removable and Recyclable Conjugated Polymers for Highly Selective and High-Yield Dispersion and Release of Low-Cost Carbon Nanotubes

High-yield and low-cost separation of high-purity semiconducting single-walled carbon nanotubes with closed-loop recycling of raw materials and solvents

Selective Dispersion of Large‐Diameter Semiconducting Carbon Nanotubes by Functionalized Conjugated Dendritic Oligothiophenes for Use in Printed Thin Film Transistors

Using In-Situ Polymerization of Conductive Polymers to Enhance the Electrical Properties of Solution-Processed Carbon Nanotube Films and Fibers

Highly Efficient and Scalable Separation of Semiconducting Carbon Nanotubes via Weak Field Centrifugation