Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Heat Transfer Model for Thread Tube in Shell and Tube Condenser

Numerical investigation on enhanced heat transfer in shell-and-tube phase change heat exchanger

Temperature Field Prediction of Rectangular Shell-and-Tube Heat Exchanger

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

A thermal calculation model for tubular condensing heat exchanger

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

THREE-DIMENSIONAL NUMERICAL SIMULATION OF TURBULENT FLOW AND HEAT TRANSFER CHARACTERISTICS IN SHELL SIDE OF SHELL-AND -TUBE HEAT EXCHANGERS

Simulation Study on Fin-tube Condenser

NUMERICAL INVESTIGATION ON HEAT STORAGE AND HEAT EXCHANGE OF THE SHELL-AND-TUBE PHASE CHANGE HEAT EXCHANGER

Physical Model and Numerical Simulation Approach of Steam Flow and Heat Transfer of Pannier-arrangement Condensers

Prediction of Temperature Distribution in Shell-And-Tube Heat Exchangers

Modeling and Simulation of the Heat Transfer Behaviour of a Shell-and-Tube Condenser for a Moderately High-Temperature Heat Pump

Numerical Study of a Power Plant Condenser Tube Arrangement

Heat transfer characteristics in vertical tube condensers: Experimental investigation and numerical validation

Thermal analysis and performance investigations of shell and tube heat exchanger using numerical simulations

Numerical Simulation and Experimental Study on Turbulent Flow in Shell Side of Shell-and-Tube Heat Exchangers

A numerical study on convective condensation of flue gas in tubular heat exchangers

Numerical Investigation on Air Flow and Heat Transfer Performance Outside Triple Row Tube Used in Air Cooling Condenser

Condensation in Horizontal Smooth Tubes: A New Heat Transfer Model for Heat Exchanger Design

SIMULATION ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER USING DIFFERENT FLUIDS

Effect of Resistance Force of Tube Bundle on the Fluid Flow and Heat Transfer Characteristics in Condenser