Abstract:Highlights • Investigated the influence of bed shape on the fluidization characteristics of Geldart B particles. • The tapered bed exhibits a higher resistance to the particle flow, making it prone to flow segregation. • The circular bed exhibits the weakest sidewall effect and the have a better quality of particle fluidization. • In the tapered bed, the uneven particle flow results in the poorest separation efficiency of the feed particles. The technology of gas-solid dense-phase fluidized bed separation is applied in the separation of fine particles in minerals due to its stable and reliable characteristics. The experiment collected time-domain distribution signals of pressure drop from fluidized beds with different shapes, systematically analyzed the spatiotemporal distribution characteristics of bed density, and studied the effects of bed shape and fluidization number N on the fluidization and flow transition of the bed layer. The results indicate significant differences in U mf among fluidized beds with different shapes, and the tapered bed requires the highest energy for fluidization. When N =1.3, the cylindrical bed layer is the most stable, maintaining an average density of 1.8 g/cm 3 , with a density fluctuation variance of 0.02 g/cm 3 . Additionally, when N <1.0, almost no bubbles inside the bed layer. With an increase in gas velocity, the time-domain distribution of pressure drop signals shows different degrees of fluctuation. When N =1.1, Conspicuous non-uniform particle flow is evident in the tapered bed, with a bubble main frequency of 8 Hz, an amplitude of 27.1, and the highest pressure drop energy signal, indicating that the tapered bed enters the bubbling state prematurely. Finally, fine coal separation experiments were conducted, and the results showed that the minimum E value for the cylindrical bed is 0.08 g/cm 3 , while the maximum E value for the tapered bed is 0.17 g/cm 3 . Graphical abstract Download : Download high-res image (121KB) Download : Download full-size image

Pressure Drop in the Gas-Solid Stirred Fluidized Bed

Wavelets Analysis of Pressure Fluctuation in Agitated Fluidized Bed

Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed

Effect of Agitation on the Fluidization Behavior of a Gas–solid Fluidized Bed with a Frame Impeller

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Investigation of pressure drop in a cocurrent downflow three-phase moving bed

Experimental study on pressure drop of packed beds with binary sintered ore particle mixtures

Experimental Investigation of Electrostatic Effect on Particle Motions in Gas-Solid Fluidized Beds

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Pressure fluctuation in gas-solid agitated fluidized bed

Solids mass flux and mean dynamic solids hold-up in the packed section of the gas-solid-solid circulating fluidized bed

Studies on the Fluidization Properties of Agitated Fluidized Bed

Research on Pressure Drop in Cir culating Fluidized Beds

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

Experimental and numerical investigations on the hydrodynamics of gas-solid fluidized bed with an inclined agitator

Effect of fluidized bed shapes on gas-solid fluidization characters and flow regime transition

A Numerical Study on Gas-Fluidized Beds of Wet Flexible Fibers

Flow Characteristics of Gas-solid Two Phase Flowing in the Cross Moving Bed

An Experimental Study on Pressure Fluctuations of Gas-Solid Two-Phase Flow in a Fast Fluidized Bed