Abstract:Abstract There are significant challenges for materials in extreme environments for a variety of applications such as aircraft engines, gas turbines, nuclear reactors, reentry vehicles, and hypersonic structures. Ceramic matrix composites (CMCs) could be ideal candidates to meet these stringent requirements for materials due to their high melting temperatures, high oxidation, corrosion and ablation resistance, low creep, and thermal cycling behavior in such extreme environments. Particularly, continuous fibers can bridge cracks in CMCs and therefore improve the strength and fracture toughness of composites. CMCs are traditionally manufactured by the melting infiltration method. With this method, the high porosity and brittle structure of fabricated CMCs are not capable of withstanding high mechanical and thermal loads. Alternatively, polymer derived ceramic composites are fabricated by incorporating carbon fibers into polymer derived ceramic matrix to achieve high fracture toughness. With the aid of protective coatings with metallic or ceramic materials, such as Nickel and boride nitride, carbon fiber could potentially withstand high temperatures without oxidation. In this study, continuous fiber reinforced silicon oxycarbide composite was manufactured with polysiloxane (PSX) resin and woven carbon fabrics through the polymer infiltration and pyrolysis process (PIP). Re-infiltration of the PSX resin into the composites, curing in an autoclave, and pyrolysis for additional 2 to 10 cycles can increase the yield of ceramics of the composites. A dense structure of the composites was observed by SEM. The EDS results showed that the elemental composition of the composites mainly consisted of carbon, silicon and oxygen. The crystalline structure of the composites was examined through XRD to indicate the degree of polymer pyrolysis to ceramics. The results of four-point bending testing of the composites showed a flexural strength of 62.17MPa, a flexural modulus of 51.30GPa, and a fracture toughness of 1.3 × 108J/m3.

RESEARCH ON CONTINUOUS FIBER REINFORCED SILICON CARBIDE COMPOSITES

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Sandwich-structured C/C-SiC Composites Fabricated by Electromagnetic-Coupling Chemical Vapor Infiltration

Processing and Characterization of Continuous Carbon Fiber Reinforced Silicon Oxycarbide Ceramic Matrix Composites

Microstructure and mechanical properties of SiC f /SiC composite prepared by chemical vapor infiltration

Properties evolution and damage mechanism of SiC/SiC composites after thermal shock at 1300 °C

Effect of SiC content on the mechanical behaviour of a three-dimensional needled C/SiC composite

Continuous SiC skeleton reinforced highly oriented graphite flake composites with high strength and specific thermal conductivity

Mechanical and Thermal Shock Properties of Cf/SiBCN Composite: Effect of Sintering Densification and Fiber Coating

High-temperature tensile behavior of 3D SiC/SiC composites

Study of SiC fiber axial compressive behavior using tensile recoil measurement

Mechanical Properties and Interfaces of Cf/SiC Composites

Mechanical and thermal shock properties of C f /SiBCN composite: Effect of sintering densification and fiber coating

Improved Mechanical Properties of Csf/SiC Composite by Rapid Hot Press Sintering

Improvement of Strength and Oxidation Resistance for SiC/graphite Composites by SiC Coating

Toughening Mechanism Of Short Carbon Fiber Reinforced Reaction Bonded Silicon Carbide Composite Ceramic

EFFECT OF C/C POROUS PREFORM ON THE MICROSTRUCTURE AND FLEXURAL STRENGTH OF C/C-SiC COMPOSITES

Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties

Thermal Expansion Behavior of Carbon Fiber Reinforced Chemical-Vapor-infiltrated Silicon Carbide Composites from Room Temperature to 1400 °C

Structure and Properties of C/C-SiC Prepared by Reactive Melt Infiltration

Additive manufacturing of continuous carbon fiber-reinforced silicon carbide composite by fused filament fabrication and precursor infiltration pyrolysis