Abstract:Purpose - The motivation for this work is to establish a model that not only includes the main factors resulting in macrosegregation but also retains simplicity and consistency for the sake of potential application in casting practice.Design/methodology/approach - A mathematical model for the numerical simulation of thermosolutal convection and macrosegregation in the solidification of multicomponent alloys is developed, in which the coupled macroscopic mass, momentum, energy and species conservation equations are solved. The conservation equations are discretized by using the control volume-based finite difference method, in which an up-wind scheme is adopted to deal with the convection term. The alternative direction implicit procedure and a line-by-line solver, based on the tri-diagonal matrix algorithm, are employed to iteratively solve the algebraic equations. The velocity-pressure coupling is handled by using the SIMPLE algorithm.Findings - Based on the present study, the liquid flow near the dendritic front is believed to play an important role in large-scale transport of the solute species. The numerical or experimental results in the literatures on the formation of channel segregation, especially those about the location of the initial flow as well as the morphology of the liquidus front, are well supported by the present investigation.Research limitations/implications - The modelling is limited to dealing with the thermosolutal convection of two-dimensional cases. More complicated phenomena (e.g. crystal movement) and 3D geometry should be considered in future research.Practical implications - The present model can be used to analyze the effects of process parameters on macrosegregation and, with further development, could be applied as a useful tool in casting practice.Originality/value - The numerical simulation demonstrates the capability of the model to simulate the thermosolutal convection and macrosegregation in alloy solidification. It also shows, that the present model has good application potential in the prediction and control of channel segregation.

Models for casting solidification of Mg-9Al alloy

Simulation of Mg-Gd Alloy During Solidification Process

Establishment of nucleation model and microstructure simulation of Al-Si alloy for low pressure die casting

An Efficient Analytical Model for Predicting the Microstructure Characteristic Parameters of the As-Cast and Solid-Solution Treated Mg-Gd-Y-Zr Cast Alloys

Modeling Microstructure and Yield Strength during Solidification and Heat Treatment Process in Al-7Si-Mg Cast Aluminum Alloys

Experimental Study and Cellular Automaton Simulation on Solidification Microstructure of Mg–Gd–Y–Zr Alloy

Relationship of Compositions, Phase Constituents and Solidification Paths of Casting Mg-Al-Zn Alloys

Prediction of the Solidification Path of Al-6.32cu-25.13mg Alloy by A Unified Microsegregation Model Coupled with Thermo-Calc

Numerical Simulation of Solidified Microstructure of Ternary Al-Si-Mg Alloy Using an Improved Cellular Automaton Method

Solidification Microstructure and Mechanical Properties of Cast Magnesium-Aluminum-Tin Alloys

Effect of Cooling Rate on Solidification Parameters and Microstructure of Al-7Si-0.3Mg-0.15Fe Alloy

Solidification Paths and Phase Components at High Temperatures of High-Zn Al-Zn-Mg-Cu Alloys with Different Mg and Cu Contents

Study on Macro- and Micromodeling of the Solidification Process of Aluminum Shape Casting

Modelling Of The Thermosolutal Convection And Macrosegregation In The Solidification Of An Fe-C Binary Alloy

Dynamic solidification model of low-density FeCrNiAl multi-component alloy

Solidification Behavior of Ni-based Superalloy at Different Cooling Rates

Numerical modeling and simulation of water cooling-controlled solidification for aluminum alloy investment casting

Mathematical Modeling on Transport Phenomena in Solidification of Fe-C Alloy

Directional Solidification and Microsegregation in a Magnesium-Aluminum-Calcium Alloy

In Situ Observation of Microstructure and Precipitate Phase Transformation during the Solidification of Mg‐Containing GH3625 Alloy at Different Cooling Rates

Effect of cooling rate on microstructure and mechanical properties of Mg-9Gd-4Y-1Zn-1Al alloy