Abstract:This study utilized a modified split Hopkinson pressure bar apparatus to subject polypropylene fiber-reinforced foamed concrete (PPFRFC) to substantial deformation loading at high temperatures and strain rates. Based on experimental results, the study systematically investigated the coupled effects of temperature and strain rate on the dynamic mechanical behavior of PPFRFC across a broad range of strain rates (0.001 s−1 to 1300 s−1) and temperatures (25 °C–600 °C). The findings revealed that elevated temperatures significantly affected various mechanical parameters including peak stress, plateau stress, elastic modulus, densification strain, dynamic increase factor (DIF), and energy absorption. Notably, with increasing temperature, the strain rate amplified the peak stress, plateau stress, and energy absorption, whereas its influence on the elastic modulus diminished. Microstructural examination revealed the absence of notable cracks in the pore walls after high-temperatures exposure. However, degradation of the cement matrix results in a loose skeleton structure within the pore walls, leading to a considerable reduction in material strength. Finally, a constitutive model was developed, considering the coupling effects of temperature and strain rate. This model accurately describes the mechanical response of the PPFRFC across various stages, including the elastic, plateau, and densification stages, as well as the stress drop behavior in the transition stage. Moreover, it effectively reflects the influence of strain rate and temperature coupling effects on the material's mechanical properties.

INVESTIGATION INTO THE ENERGY ABSORPTION AND FAILURE CHARACTERISTICS OF SYNTACTIC FOAMS AT HIGH STRAIN RATES

Experimental Study of the Compressible Behavior of Low-Density Polyurethane Foam

Mechanical Performance and Cushioning Energy Absorption Characteristics of Rigid Polyurethane Foam at Low and High Strain Rates

Compressive properties and energy absorption of rigid polyurethane foam

An Experimental Investigation of the Dynamic Mechanical Behaviors of Hollow Spheres Filled Syntactic Foam

Dynamic Responses and Failure of Short Glass-Fiber Reinforced Syntactic Foams

Study of the constitutive relationship of rigid polyurethane foam 1)

COMPRESSIVE BEHAVIOR OF EPOXY SYNTACTIC FOAM

A REVIEW OF STUDIES ON THE MECHANICAL BEHAVIOR OF SYNTACTIC FOAMED PLASTICS

Dynamic Mechanical Response, Energy Absorption Capacity, and Constitutive Modeling of Polypropylene Fiber-Reinforced Foamed Concrete under High Temperature

A Study of Experimental Method for Mechanical Properties of Rigid Polyurethane Foam under Hydrostatic Compressive Loading

Numerical Analysis on Failure Behaviour of Polyurethane Polymer Concrete at High Strain Rates in Compression

Modelling the dynamic compressive response of syntactic foam with hierarchical cell structure

Study on dynamic mechanical properties and energy absorption of polymeric foams

VISCO-ELASTIC (PLASTIC) EFFECTS AND FAILURE BEHAVIOR OF PUR FOAMED PLASTICS

Experimental Investigation and Modeling of Mechanical Behaviors of Polyurea over Wide Ranges of Strain Rates and Temperatures

Macroscopic and Microscopic Mechanical Properties of Polyurethane Syntactic Foams Filled with Hollow Microspheres

Experimental Research on Dynamic Mechanical Properties of High-Density Foamed Concrete

Influence of Strain Rate and Temperature on Compressive Properties and Energy Absorption Efficiency of Expanded Polystyrene and Flexible Polyurethane Foam

An Experimental Study of Triaxial Compressive Dynamic Mechanical Properties of Foam Plastics

Quasi-static and High Strain Rates Compressive Behavior of Aluminum Matrix Syntactic Foams