Abstract:Polyurethane foam (PUF) is one of the most well-known cellular materials and is widely employed in various industrial and biomedical fields thanks to its many advantages. These include mechanical and material characteristics such as low density and thermal conductivity, and high specific elastic modulus and strength. Despite of these advantages, the PUF has extremely complex material nonlinearity, with changes in density and strain rate, which is a major obstacle to material design and the application of PUF-based structures. PUF has elasto-viscoplastic behavior including three stages of material features, linear elasticity, softening/plateau with stress drop and densification. These phenomena depend strongly on strain rate and density. Therefore, in this study, a phenomenological constitutive model, namely, an elasto-viscoplastic model, was proposed to describe the density- and strain rate-dependent material nonlinear behavior of PUF. The yield surface-independent plastic multiplier, and the hardening- and softening-associated internal state variables proposed by Frank and Brockman, and Zairi et al. were adopted in the constitutive model, respectively. The proposed constitutive model was discretized using the implicit time integration algorithm and was implemented into a user-defined subroutine of the commercial finite element analysis program, ABAQUS. At the same time, a deterministic identification method for material parameters of the constitutive model was introduced to predict the precise material response of PUF under arbitrary densities and strain rates. To do this, the three-dimensional constitutive model was contracted to a one-dimensional equation, and the explicit equation for each material parameter was derived. Then, the strain hardening- and softeningdependent material parameters were calculated using experimental results, such as the work hardening ratestress curve and the yield stress-strain rate curve. After analyzing the obtained material parameters, it was found that the material parameters were strongly dependent on the density and the strain rate. Consequently, the macroscopic material response of PUF, such as a uniaxial compressive stress-strain curve, can be predicted based on the proposed method in this study.

Experimental Study of the Compressible Behavior of Low-Density Polyurethane Foam

Static and Dynamic Behavior of PU Foams with Multilayer Coatings

A Study of Experimental Method for Mechanical Properties of Rigid Polyurethane Foam under Hydrostatic Compressive Loading

Study of the Constitutive Relation of Low Density Plyethylene Foam under Compression

High-strain Rate Compressive Behavior of CFRP Confined Concrete: Large Diameter SHPB Tests

Mechanical Performance of Polystyrene Foam (EPS): Experimental and Numerical Analysis

Stiffness, Energy Dissipation, and Hyperelasticity in Hierarchical Multilayer Composite Nanocoated Open‐Cell Polyurethane Foams

Experimental Investigation on the Dynamic Compressive Behavior of Rubberized Concrete

Compressive properties and energy absorption of rigid polyurethane foam

Effect of Strain Rate on the Compressive Behavior of Polyurethane Bonding

Experimental Study of the Dynamic and Static Compression Mechanical Properties of Closed-Cell PVC Foams

Experiment and Modeling for Compressive Strength of Polyurethane Grout Materials

Investigation of Density- and Strain Rate-dependent Strain Hardening-softening-coupled material Behavior of Polyurethane Foams using Elasto-viscoplastic Constitutive Model

Experimental Research on Dynamic Mechanical Properties of High-Density Foamed Concrete

Characterizing and Modeling the Wide Strain Rate Range Behavior of Air-Filled Open-Cell Polymeric Foam

Dynamic Mechanical Properties and Constitutive Modeling of Polyurethane Microporous Elastomers

Influence of Strain Rate and Temperature on Compressive Properties and Energy Absorption Efficiency of Expanded Polystyrene and Flexible Polyurethane Foam

Modelling the dynamic compressive response of syntactic foam with hierarchical cell structure

Experimental approach for characterizing the nonlinear, time and temperature‐dependent constitutive response of open‐cell polyurethane foams

A New Method for the Dynamics Analysis of Super-Elastic-Plastic Foams under Inhomogeneous Loading and Unloading Conditions

Experimental Analysis of the Mechanical Properties of Carbon Foams Under Quasi-Static Compressive Loads