Abstract:In this paper, novel syntactic foams (CPSFs) composed of the rigid polyurethane foam (PUR) and the fly ash cenospheres were prepared through the pressure infiltration approach. The aluminum honeycombs were proposed to improve the mechanical response of CPSFs by internally restricting the lateral deformation. The influences of the cenospheres size and the reinforcement on the dynamic behavior of the CPSFs were specified. The dynamic compression tests were carried out for the plain and Al honeycomb reinforced CPSFs with the strain rate ranging from 0.001/s to 2000/s. The results shown that the dynamic strength of the CPSFs containing large cenospheres was 35%–77% higher than that under quasi-static compression. But, the plateau stress was insensitive to the strain rate because the main failure mechanism of the CPSFs at different stages was dominated by different material compositions. The dynamic compressive strength and plateau stress of the plain CPSFs containing small cenospheres shown obvious strain rate sensitivity. The failure mechanism of the two plain CPSFs both transformed from shear failure into longitudinal cracking with the loading condition changed from the quasi-static to high-velocity impact. For the reinforced CPSFs, the dynamic mechanical properties including the strength and the plateau stress were sensitive to the strain rate. The failure mode of the reinforced CPSFs was dominated by the gradual compressive deformation. It was suggested that the Al honeycombs can not only enhance the mechanical properties, but also improve the dynamic response of the CPSFs. As a consequence, the dynamic energy absorption of the CPSFs varied in the range of 7–14 MJ/m3, and was about 23%–32% higher than that under static compression. This study expects to provide a potential approach in disposing the industrial waste and an innovation to adopt the internal constraints to improve mechanical behaviors of syntactic foams.

Quasi-static and High Strain Rates Compressive Behavior of Aluminum Matrix Syntactic Foams

Impact Properties of Uniaxially Thermoformed Auxetic Foams

Preparation and Compressive Performance of an A356 Matrix Syntactic Foam

Deformation and energy absorption properties of cenosphere/aluminum syntactic foam-filled circular tubes under lateral quasi-static compression

Deformation and energy absorption properties of cenosphere-aluminum syntactic foam-filled tubes under axial compression

Modelling the dynamic compressive response of syntactic foam with hierarchical cell structure

Effect of the cenospheres size and internally lateral constraints on dynamic compressive behavior of fly ash cenospheres polyurethane syntactic foams

Mechanical Properties and Constitutive Model Applied to the High-Speed Impact of Aluminum Foam That Considers Its Meso-Structural Parameters.

Enhancement in the Mechanical Properties of Newly Developed Ceramic Reinforced Al-Based Syntactic Foams: Analysis of Microstructure, Mechanical Response, and Energy Absorption Properties

Quasi-static Deformation Mechanism and Compressive Properties of Aluminum Foams Fabricated by Friction Stir Processing

Compressive Properties and Energy Absorption of Aluminum Foams with a Wide Range of Relative Densities

Quasi-static compressive properties and damage behavior of aluminum matrix syntactic composites with different diameters of glass cenospheres

Study on Quasi-Static Compressive Properties of Aluminum Foam-Epoxy Resin Composite Structures

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

Mechanical Properties of Aluminium Foam and How Density, Temperature, and Strain Rate Affect Dynamic Strain–Stress Relationship

Anisotropic compression response of functionally gradient syntactic foam comprising of fly ash cenosphere and polyurethane

An investigation into low-velocity impact behavior of functionally graded treated and untreated cenosphere-based syntactic foams

Mechanical Response of the Fly Ash Cenospheres/polyurethane Syntactic Foams Fabricated Through Infiltration Process

Characterization of Aluminum Foam Impact Response

Energy absorption behaviour of aluminium foam under medium strain rate

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study