Abstract:We analyze numerically an erbium-doped segmented-cladding fiber (SCF) for optical amplification. The fiber has a uniform high-index core and a leaky cladding consisting of alternating high and low refractive-index angular segments of equal size, where erbium is doped in the core and the high-index cladding segments. By choosing the fiber parameters properly, the fiber can offer effective single-mode operation at both the signal (1530 nm) and pump (980 nm) wavelengths with an ultralarge core. We calculate the mode-field distributions in the fiber at these two wavelengths with a full-vector finite-element method. We obtain the gain characteristics and the pump threshold of the fiber by solving the propagation rate equations. With a typical erbium-ion concentration of 0.7 times 10 25 ions/m 3 , an input pump power of 280 mW, and an input signal power of 0.1 muW, the maximum gain achievable varies from ~ 14 dB to ~ 37 dB with an optimal fiber length of several meters, when the core diameter varies from 40 mum to 28 mum. The threshold pump power required is of the order of 100 mW at 0.1-muW input signal power, and the saturation output signal power is of the order of 100 mW at 280-mW input pump power. The noise figure is ~ 4 dB. Our analysis suggests that, by using a high enough pump power, a few meters of erbium-doped ultralarge-core SCF can provide a small-signal gain comparable with that of a conventional erbium-doped fiber.

Novel Three-Stage Structure Of Erbium Doped Fiber Amplifier

A Novel 3-Stage Structure for a Low-Noise, High-Gain and Gain-Flattened L-band Erbium Doped Fiber Amplifier

A New Three-stage Structure for a High-performance L-band Erbium-doped Superfluorescent Fiber Source

Novel Split-Band Erbium-Doped Fiber Amplifier

Theoretical and Experimental Investigations on Erbium-Doped Fiber Amplifiers

Study on a Novel Low-Noise Erbium-Doped Fiber Amplifier

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Gain Performances of 980 Nm-Pumped Erbium-Doped Fiber Amplifiers

Gain-Enhanced Double-Pass Long-Wavelength-Band Erbium-Doped Fiber Amplifier Using Backward Pumping

Modeling of Er&#x000B3;+-Ce&#x000B3;+-Doped Telluride Fiber Amplifier

Amplification and Spontaneous Emission of Er-doped Fiber Both in Theory and Experiment

Experimental study of two-stage erbium doped fiber amplifiers pumped by 980 nm and 1480nm LD

Analysis of Erbium-Doped Ultralarge-Core Segmented-Cladding Fibers for Optical Amplification

120 nm bandwidth erbium-doped fiber amplifier

C+L-Band Erbium-Doped Fiber Broadband Light Source Using One-Stage Configuration

Theoretical and Experimental Investigation on Erbium-Doped Fiber Amplifiers with Long-Period Fiber Grating Filters

Low Noise Figure C+L-band Erbium-Droped Fiber Amplifier

A New Adaptive Erbium-Doped Fiber Amplifier

A Novel Two-Stage Erbium Amplified Spontaneous Emission Fiber Source with 80nm Bandwidth

Optimization of Pump Efficiency of Er(3+)-Ce(3+)doped Telluride Fiber Amplifier.

A Novel Conventional/Long-Band Erbium-Doped Fibre Amplified Spontaneous Emission Source With 80 Nm Bandwidth