Abstract:The series resonance type fault current limiter has the advantages of simple operating principle and topological structure,etc. The primary parameter of series resonance type fault current limiter for high-voltage system is reasonable.However,in the process of restraining fault current after a fault occurrence in electrical network,the capacitor and parallel inverter switch will confront poor working condition.This paper studies the above condition by simulation using the software Matlab.Proceeding from the study,we arrive at the conclusions:1)in the process of closing the inverter switch short circuit capacitor to make the current limiter work in short circuit current limiting mode switching from normal operation mode,there is higher-order of voltage(current)oscillation between capacitor and parallel inverter switch,and the peak value of voltage(current)increases and oscillates with the growing of the speed for closing the inverter switch; 2)when the inverter switch is composed of semiconductor device,control system must respond to short circuit and close the inverter switch quickly,otherwise,the semiconductor device may be damaged by over current(voltage);3)during fault current limiter working in current limiting mode to short circuit loop being shut off by relay protection device,the inverter switch will bear the full fault current and oscillation current.If using semiconductor device as inverter switch,the capacity of semiconductor device must be chosen according to the working condition.

RESEARCH OF SHORT CIRCUIT FAULT CURRENT LIMITER USED IN THREE-PHASE UNGROUNDED POWER SYSTEMS

SHORT CIRCUIT FAULT CURRENT LIMITER USED IN GROUNDED THREE-PHASE POWER SYSTEM AND ITS CONTROL MODE

Research of fault-current limiter for three-phase four-wire power system

Short Circuit Current Limiter in As Network

Design and Research of a Novel Unified Power Flow Controller with Fault Current Limiter

Fault Current Limiter Based on Self-Turn-Off Devices for Three-Phase Ungrounded Power Systems

A Novel Six-Leg Three-Phase Fault Current Limiter

Research of fault current limiter based on half-controlled rectifier bridge for three-phase four-wire power system

Saturated-core fault current limiters for AC power systems: Towards reliable, economical and better performance application

Hybrid Multifunctional Saturated-core Fault Current Limiter

Simulation Study of New Solid-State Fault Current Limiter

An Economical Three-Phase Fault Current Limiter Considering Different Types of Fault

Study on Mathematic Model and Model Simulation of the Three Phase Solid State Fault Current Limiter

Parameter design and optimization of unified power flow controller with fault current limiting

IGCT-Based Fault Current Limiter for Three- Phase Power System with Grounded Neutral and Its Control Strategy

STUDY ON CONTROL SYSTEM OF THREE-PHASE SOLID STATE FAULT CURRENT LIMITER

Dc Capacitor Parameter Design Of Unified Power Flow Controller With Fault Current Limiting

Simulation Study of Series Resonance Type Fault Current Limiter

Control Strategy and Test Study of Bi-directional Current's Solid State Fault Current Limiter

Impact on Transient State Stability of Power System by Solid State Current Limiter

A Fault Diagnosis Method for Solid-state Fault Current Limiters Used in Three Phase Ungrounded System