Abstract:In current work, the investigation centered on assessing the impact of the CeO 2 to Al 2 O 3 ratio in a 5%Ni/CeO 2 –Al 2 O 3 catalyst on the CO 2 hydrogenation reaction within the temperature range of 240–400 °C. The primary aim was to achieve enhanced conversion rates, while minimizing coke deposition on the catalyst surface. Nickel was incorporated into the CeO 2 –Al 2 O 3 supports via the deposition–precipitation method. The various physicochemical properties of fresh, reduced and spent catalysts were studied using techniques such as thermal gravimetric analysis (TGA), X-ray diffraction (XRD), N 2 adsorption/desorption, temperature programmed reduction (TPR), H 2 -chemisorption, X-ray fluorescence (XRF), and CHNS analyzer. XRD results revealed that the addition of CeO 2 to the Ni/Al 2 O 3 catalyst and the increase in ceria loading in the hybrid support had no obvious effect on the crystalline structure. However, several properties including reducibility, coke deposition, and coke formation quantity, coke structure on the catalyst surface, catalytic performance, and thermal stability were altered. The CO 2 conversion remained relatively stable (41.25%) up to 35 h initial on stream for Ni/Al 2 O 3 catalyst, indicating no significant deactivation. Conversely, Ni/CeO 2 –Al 2 O 3 catalyst exhibited high stability up to 45 h initial. The highest CO 2 conversion (58%) was achieved with the Ni/CeO 2 (50%)–Al 2 O 3 (50%) at 400 °C, primarily attributed to a lower interaction between nickel species and the support, along with a higher reduction degree. Ni/CeO 2 –Al 2 O 3 catalysts displayed higher methane selectivity and lower CO selectivity compared to both Ni/Al 2 O 3 and Ni/CeO 2 catalysts across the entire temperature range of 240–400 °C.

Methanation Of Carbon Dioxide By Hydrogenating Over Ni Supported On Al2o3 Catalysts

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

CO2 Methanation on the Catalyst of Ni/MCM-41 Promoted with CeO2

A DRIFTS and TPD study on the methanation of CO2 on Ni/Al2O3 catalyst

CO2 methanation on Ni-Ce0.8M0.2O2 (M=Zr, Sn or Ti) catalyst: Suppression of CO via formation of bridging carbonyls on nickel

Methanation of CO2 over Nickel Catalysts: Impacts of Acidic/basic Sites on Formation of the Reaction Intermediates

Catalytic Methanation of Syngas over Ni-based Catalysts with Different Supports

CO2 hydrogenation to methane over Ni/ZrO2 and Ni/CeO2 catalysts: experimental and DFT studies

CO2 hydrogenation over 5%Ni/CeO2–Al2O3 catalysts: effect of supports composition

CO2 methanation over nickel-CeO2 catalyst supported on Al2O3: Different impregnation strategies and Ni-Ce ratios

Mechanistic understanding of CO2 hydrogenation to methane over Ni/CeO2 catalyst

Influence of CeO2-ZrO2 and α-Al2O3 on methane partial oxidation over Ni catalyst

Synergistic effect of Ni and NiO in hydrogen reduction for CO methanation

A detailed characterization study of Ni/CeO 2 catalysts identifies Ni availability as the primary factor affecting CO 2 methanation performance

CO2 Methanation over Nickel-Based Catalysts Supported on MCM-41 with in Situ Doping of Zirconium

Ceria-supported Ni catalyst with high catalytic activity, selectivity and stability for CO 2 conversion to CH 4 by hydrogenation reaction investigated by X-ray absorption spectroscopy

An Al2O3-supported NiFe bimetallic catalyst derived from hydrotalcite precursors for efficient CO2 methanation

NiAlFe catalysts based on hydrotalcite-like precursors for low temperature CO 2 methanation: Electronic effects among components and intrinsic activity of Ni site

In-Situ FTIR Study of CO2 Adsorption and Methanation Mechanism Over Bimetallic Catalyst at Low Temperature

Low-temperature methanation of fermentation gas with Ni-based catalysts in a multicomponent system