Abstract:with the increase of regeneration temperature, the compositions of residual coke on the catalyst change from pyrene and phenanthrene to naphthalene;The appearance of nitrogen oxide compounds during steam regeneration makes the regeneration temperature not too high.We derive the kinetics of steam regeneration and obtain an activation energy of about 177.8 kJ/mol during the steam regeneration process.Compared with the air combustion process, the steam regeneration process is more difficult to occur.Methanol-to-olefins (MTO) is industrially applied to produce ethylene and propylene using methanol converted from coal, synthetic gas, and biomass. SAPO-34 zeolites, as the most efficient catalyst in MTO process, are subject to the rapid deactivation due to coke deposition. Recent work shows that steam regeneration can provide advantages such as low carbon dioxide emission and enhanced light olefins yield in MTO process, compared to that by air regeneration. A kinetic study on the steam regeneration of spent SAPO-34 catalyst has been carried out in this work. In doing so, we first investigated the effect of temperature on the regeneration performance by monitoring the crystal structure, acidity, residual coke properties and other structural parameters. The results show that with the increase of regeneration temperature, the compositions of residual coke on the catalyst change from pyrene and phenanthrene to naphthalene, which are normally considered as active hydrocarbon pool species in MTO reaction. However, when the regeneration temperature is too high, nitrogen oxides can be found in the residual coke. Meanwhile, as the regeneration temperature increases, the quantity of residual coke reduces and the acidity, BET surface area and pore structure of the regenerated samples can be better recovered, resulting in prolonging catalyst lifetime. We have further derived the kinetics of steam regeneration, and obtained an activation energy of about 177.8 kJ·mol−1. Compared that with air regeneration, the activation energy of steam regeneration is higher, indicating that the steam regeneration process is more difficult to occur.© 2020 The Chemical Industry and Engineering Society of China, and Chemical Industry Press Co., Ltd.. All rights reserved.

STUDY ON CO2/CO RATIO IN PRODUCT GAS OF SPENT CATALYTIC CRACKING CATALYST DURING REGENERATION

Kinetic and Regenerator Modeling of the Coke Combustion in the Moving Bed MTP Process

Discussion on Improving Regeneration System of Fluid Catalytic Cracking Unit

The Study Of Catalyzed Gasification Reaction Of Char By Co2

Decomposition of CO2 Using Pulsed Corona Discharges Combined with Catalyst

Study on catalytic processes of carbon monoxide coupling C regeneration reaction

Study on regeneration characteristics and dust deposition mechanism of nickel based tar-cracking catalyst

Catalyst regeneration method capable of reducing carbon dioxide discharge

Thermodynamics and Regeneration Studies of CO2 Adsorption on Activated Carbon

Insights into the effect of regeneration temperature on physicochemical properties and SO2 removal over powdered activated coke

Comparative Study Between Fluidized Bed and Fixed Bed Reactors in Methane Reforming with CO2 and O2 to Produce Syngas

Kinetics of steam regeneration of SAPO-34 zeolite catalyst in methanol-to-olefins (MTO) process

A multistage NOx reduction process for a FCC regenerator

Study of Fluid Catalytic Cracking Process in Experimental Downer Reactor

Controlled regeneration of ZSM-5 catalysts in the combined oxygen and steam atmosphere used for catalytic pyrolysis of biomass-derivates

Regeneration Behavior of Comercial Deactivated Mo-Ni/USY- Al_2O_3 Catalyst

Analysis of the Coke Precursor on Bio-oil Refining Catalyst and the Regeneration of the Deactivated Catalyst

Effect of operating parameters for CO 2 capture from syngas of supercritical water gasification using K 2 CO 3 /γ-Al 2 O 3 composite adsorbent

Simulation Analysis of Gas-Solid Two-Phase Flow and Reaction in a Novel Catalytic Cracking Reactor

An Analysis of Regeneration Energy Consumption in Absorption and Dissociation Processes of Flue Gas CO2 and Its Simulation

CONVERSION OF CO2 TO CO USING PULSED CORONA DISCHARGES AND CATALYST