Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

AREA MODEL OF HEAT TRANSFER BETWEEN GAS AND SOLID IN THE FLUIDIZED BED

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Modeling Agglomeration Behavior in High Temperature Gas–Solid Fluidized Beds Via Monte Carlo Method

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

A Volatile Spray Zone Model and Experimentation in a Gas-Solid Fluidized Bed with Liquid Injection

Hydrodynamics and Heat Transfer in a Fluidized Bed with Liquid Spray: Particle Color-Change Based Measurement and Modelling

Experimental and Modeling Investigation of Liquid-Induced Agglomeration in a Gas–Solid Fluidized Bed with Liquid Spray

Particle-Fluid Heat Transfer In A Circulating Fluidized Bed

Mathematical Model and Numerical Solution of the Heat Transfer Process in the Solid Adsorption System

Numerical simulation of gas–solid heat transfer characteristics of porous structure composed of high-temperature particles in moving bed

Heat Transfer in a Pulsating Fluidized Bed

RADIATION HEAT TRANSFER MODEL OF A CIRCULATING FLUIDIZED BED

Heat transfer in circulating fluidized bed and its modeling

Solid particle convection models in the dense phase of fluidized bed

Effect of fines addition on heat transfer performance in gas-solid fluidized bed: An integrated experimental, simulation, and theoretical study

The analysis of hot spots in large scale fluidized bed reactors

GAS FLOW AND HEAT TRANSFER IN MOVING PARTICULATE BED

Numerical modelling of heat transfer between gas and solid in a vibrated fluidised bed

Heat transfer of tubes in gas-solid cross flow

Numerical Analysis of Heat Transfer and Solid Volume Fraction Profiles Around a Horizontal Tube Immersed in a Supercritical Water Fluidized Bed