Abstract:Particle and bubble motion plays an important role in determining the hydrodynamic characteristics of a fluidized system. The dynamic parameters of a fluidized bed are reflection of the complex correlation between particle–particle and particle–bubble in a system. A two-dimensional Eulerian–Eulerian model integrating the kinetic theory of granular flow is used to simulate the bubble and linear low density polyethylene (LLDPE) particle dynamic behavior in a gas–solid fluidized bed. The simulated method is validated by pressure fluctuation experiment. The computed vertical turbulent energy spectrum of particles is applied to identify the particle motion intensity and the inhomogeneity of turbulent energy dissipation. The energy spectrum captures the Levy–Kolmogorov law in inertial range at high frequency. Furthermore, the flatness factors of wavelet decomposition coefficients of particle fluctuation velocity are for the first time introduced to analyze the intermittence caused by coherent structures in the flow field. The results show that the intermittence in dissipation range is much stronger than that in energy-containing and inertial range, and reinforces rapidly as the radial distance and the bed height increase. Moreover, the acoustic emission (AE) energy is found to be able to indicate the flow regimes. By combing granular temperature and AE energy, the relationship between the spatial distribution of granular temperature and the flow regimes is established. To get more detail of bubble motion behavior, the power spectrum of voidage fluctuation is analyzed. This work provides valuable insights into the dynamic characteristics and the flow field information of a gas–solid fluidized bed by CFD simulation.

Heat Transfer in a Pulsating Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Heat Transfer of Batch Simulating Continuous Fluidized Bed with Wet Particles

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Hydrodynamics and Heat Transfer in a Fluidized Bed with Liquid Spray: Particle Color-Change Based Measurement and Modelling

Dynamic and Steady-State Characterization of the Liquid Spray Zone in an Externally Heated Gas–Solid Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Pulsing Combustion Technology for Firing Solid Fuels

Heat transfer in circulating fluidized bed and its modeling

Heat Transfer in a Pressurized Circulating Fluidized Bed

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

Factors Affecting the Heat Transfer in a Circulating Fluidized Bed Boiler

Experimental Study on Fluidizing and Pulsating Characteristics of a Self-Pulsating Fluidized Bed

Computational Fluid Dynamics Simulations of Interphase Heat Transfer in a Bubbling Fluidized Bed

Fluidization Behavior of a High-temperature Bubbling Fluidized Bed

Hydrodynamics of Bubbling Fluidized Beds at High Temperature

Bed-to-surface heat transfer in a BFB oxy-fuel combustor

Effect of Operating Parameters on Gas‐Solid Hydrodynamics and Heat Transfer in a Spouted Bed

RADIATION HEAT TRANSFER MODEL OF A CIRCULATING FLUIDIZED BED