Abstract:The precipitation of wax at low temperature often leads to the viscosity increase of waxy crude oil, and even causes the blockage of pipelines in severe cases. The addition of polymer additives is an effective method for inhibiting wax precipitation. In the present work, poly(styrene-octadecyl acrylate)s with low crosslinking density were prepared through microemulsion polymerization, with styrene and octadecyl acrylate as monomers and N -(hydroxyethyl) acrylamide (NMA) as the crosslinking agent. The chemical structures and molecular weights of polymers were characterized by Fourier transform infrared spectroscopy and gel permeation chromatography, respectively. The crosslinking densities (CLD) of polymers were determined in the range of 1.32 × 10 −4 to 4.66 × 10 −4 cm 3 /mol by the dissolution equilibrium method. Waxy model oils were prepared to explore the crosslinked polymers on the wax crystallization behaviors by using X-ray diffraction (XRD) approaches and isothermal crystallization kinetics (ICK). As the CLD of polymers increases to 1.99 × 10 −4 cm 3 /mol, the crystallinity index (CI), grain size, and structural strength of the wax crystals decrease. However, as the CLD of polymers is further increased to 4.66 × 10 −4 cm 3 /mol, all of the above parameters increase, due to the deterioration of the co-crystallization ability of polymers. In the ICK tests, The Avrami index n of the model oil samples increases from 1.94 to 2.43 as the CLD increases, implying that the nucleation effect of polymers is increased. The effect of CLD on the cold flowability of Inner Mongolia crude oil was investigated by pour point test, rheology, differential scanning calorimeter (DSC), and polarized light microscopy (PLM). The results show that the pour point, viscosity, yield stress, thixotropic ring area, cumulative wax precipitation and wax crystal size of the crude oil decrease when the CLD of polymers increases to 1.99 × 10 −4 cm 3 /mol. However, if the CLD is further increased to 4.66 × 10 −4 cm 3 /mol, all of the parameters increase. Consequently, the mechanism for the improvement of waxy crude oil by mildly crosslinked polymer is proposed.

Development of A New Type of Low-Temperature Pattern Wax

Study on the Preparation and Properties of Polyethylene Wax Ultrafine Micro-Emulsion

Characterization of wax precipitation in wax-doped asphalt binders by variable-temperature polarized light microscope and improved viscosity algorithm

Flexible Investment Casting Wax Patterns for 3D-Printing: Their Rheological and Mechanical Characterizations

The Influence of Injection Processing on the Shrinkage Variation and Dimensional Stability of Wax Pattern in Investment Casting

Enhancement of cold flowability for high waxy crude oil by the mildly crosslinked poly(styrene-octadecyl acrylate)

Numerical Simulation of the Wax Injection Process for Investment Casting

EFFECT OF WAX CRYSTAL MORPHOLOGY ON THE POUR POINT DECLINE OF CRUDE OIL

Cavity Pressure and Dimensional Accuracy Analysis of Wax Patterns for Investment Casting

Geometric Confinement Growth of Wax Crystals by Star Acrylate Polymer for Enhanced Cold Flowability of Waxy Crudes

Effect of operating conditions on wax deposition in a laboratory flow loop characterized with DSC technique

Investigation on the condensate gas composition variation and wax deposition mechanism during temperature-induced phase transition process

Experimental Investigation Of Wax Deposition At Different Deposit Locations Through A Detachable Flow Loop Apparatus

Optimizing the low‐temperature performance of high‐wax‐content crude oil with emulsion‐based wax inhibitors: Mechanisms and efficacy

Waxy Gels with Asphaltenes 2: Use of Wax Control Polymers

Shaping and mechanical performance of gelcasting Ti6Al4V alloys with paraffin wax and stearic acid coated on powder surface

Effect of Mold Material on Shrinkage of Investment Casting Wax Pattern

Novel laboratory cell for fundamental studies of the effect of polymer additives on wax deposition from model crude oils

Cold damage from wax deposition in a shallow, low-temperature, and high-wax reservoir in Changchunling Oilfield

Simulation Study on Wax Injection for Investment Casting

Author Response for "optimizing the Low‐temperature Performance of High‐wax‐content Crude Oil with Emulsion‐based Wax Inhibitors: Mechanisms and Efficacy"