Abstract:The distributed actively heated fiber-optic method is widely used to measure soil thermal conductivity and water content. However, the significant limitations of this technique are that prior soil specific calibration is required, and the measurement of soil volumetric heat capacity, a critical soil thermal parameter, is restricted. This study investigates a novel fiber-optic dual-probe heat pulse method, which utilizes fiber-optics to monitor the temperature response at a certain distance from the heat source to obtain the thermal conductivity and the volumetric heat capacity. Subsequently, the water content can be estimated from its linear relationship with soil volumetric heat capacity. The fiber-optic dual-probe heat pulse method is aimed to overcome the spatial-scale measurement limitations considering the distributed sensing capability of fiber-optic. This requires the sensor to be more robust than the traditional dual-probe method, hence a completely different ratio of the probe diameter to the distance between adjacent cables. Therefore, the applicability of the existing theory needs further verification, and the heating strategies need careful consideration. This study uses a 6 mm diameter fiber Bragg grating (FBG) sensor encapsulated by the alundum tube to conduct laboratory feasibility tests. Two adjacent sensors are fixed in the soil at a distance of 14.60 mm. Different heating powers (30 W/m, 40 W/m, and 50 W/m) and heating durations (10 s, 30 s, 50 s, and 120 s) are implemented. The results showed that the novel approach allows accurate soil volumetric heat capacity and water content estimation with appropriate heating strategies and data interpretation methods. The heating duration below 30 s is a poor fit because of the low-temperature rise, requiring a longer heating duration. For the 120 s heating duration, the measurement error in soil volumetric capacity is less than 2%. On the other hand, the instantaneous line heat source theory overestimates the soil volumetric heat capacity by 5%, while the short-duration line heat source theory performs well in the method.

Reviews of Pulse-heating Technique for Thermophysical Properties Measurement

Improved Apparatus for Inline Measurement of Residence Time Distribution of Thermomechanically Complex Systems

Thermal Characterization of Microscale Conductive and Nonconductive Wires Using Transient Electrothermal Technique

Photothermal phenomenon: Extended ideas for thermophysical properties characterization

A New Noncontact Probe for Thermophysical Properties of Solid Surfaces

High temperature imaging dynamic measurement techniques under harsh experimental environment

Simultaneous Measurement of Thermal Conductivity and Heat Capacity Across Diverse Materials Using the Square-Pulsed Source (SPS) Technique

Review of Photothermal Technique for Thermal Measurement of Micro-/Nanomaterials

Numerical Approach for the Theory of Harmonic Self-Heating Technique to Measure Thermophysical Properties of Suspended Thin Samples

The Ultrafast Laser Pump-Probe Technique for Thermal Characterization of Materials With Micro/Nanostructures

The Technique of Doped Optical Fiber Thermometer Based on Fluorescence Lifetime Measurement

A Dual-Probe Heat Pulse Approach Using Heated Fiber-Optic Temperature Sensing

EXCITATION PULSE WIDTH IN THE PEAK DIFFUSING METHOD FOR THERMAL DIFFUSIVITY MEASUREMENT

A sub-nanosecond pyrometer with broadband spectral channels for temperature measurement of dynamic compression experiments

Thermophysical properties of 1D materials: transient characterization down to atomic level

Novel evaluation method for non-Fourier effects in heat pulse experiments

On the dynamic thermal conductivity and diffusivity observed in heat pulse experiments

A Novel Heat Pulse Method in Determining "Effective" Thermal Properties in Frozen Soil

Review of High Temperature Measurement Technology Based on Sapphire Optical Fiber

Development and Performance Analysis of an Atomic Layer Thermopile Sensor for Composite Heat Flux Testing in an Explosive Environment

Measurement of High-temperature Thermophysical Properties of Bulk and Coatings Using Modulated Photothermal Radiometry