Abstract:High heat fluxes generated in electronics and semiconductor packages require materials with high thermal conductivity to effectively diffuse the heat and avoid local hotspots. Engineered heat spreading materials typically exhibit anisotropic conduction behavior due to their composite construction. The design of thermal management solutions is often limited by the lack of fast and accurate characterization techniques for such anisotropic materials. A popular technique for measuring the thermal diffusivity of bulk materials is the Ångstrom method, where a thin strip or rod of material is heated periodically at one end, and the corresponding transient temperature profile is used to infer the thermal diffusivity. However, this method is generally limited to the characterization of one-dimensional samples and requires multiple measurements with multiple samples to characterize anisotropic materials. Here, we present a new measurement technique for characterizing the isotropic and anisotropic in-plane thermal properties of thin films and sheets as an extension of the one-dimensional Ångstrom method and other lock-in thermography techniques. The measurement leverages non-contact infrared temperature mapping to measure the thermal response from laser-based periodic heating at the center of a suspended thin film sample. Uniquely, our novel data extraction method does not require precise knowledge of the boundary conditions. To validate the accuracy of this technique, numerical models are developed to generate transient temperature profiles for hypothetical anisotropic materials with known properties. The resultant temperature profiles are processed through our fitting algorithm to extract the in-plane thermal conductivities without knowledge of the input properties of the model. Across a wide range of in-plane thermal conductivities, these results agree well with the input values. Experiments demonstrate the approach for a known isotropic reference material and an anisotropic heat spreading material. The limits of accuracy of this technique are identified based on the experimental and sample parameters. Further standardization of this measurement technique will enable the development and characterization of engineered heat spreading materials with desired anisotropic properties for various applications.

Novel evaluation method for non-Fourier effects in heat pulse experiments

On the dynamic thermal conductivity and diffusivity observed in heat pulse experiments

Challenges in the thermal modeling of highly porous carbon foams

Rear-surface integral method for calculating thermal diffusivity: finite pulse time correction and two-layer samples

Transient non-Fourier behavior of large surface bodies

The Application of the Finite Elements Method in the Transient Measurements of Thermophysical Parameters

Generalized heat conduction in heat pulse experiments

Evaluation of Heat Conduction and Visualization of Heat Flux in a Plate Making Use of Heat Transfer Experiments

Exceptions to Fourier's Law at the Macroscale

Rear-surface integral method for calculating thermal diffusivity from laser flash experiments

Investigating the whirling heat current density in the Guyer--Krumhansl equation

EXCITATION PULSE WIDTH IN THE PEAK DIFFUSING METHOD FOR THERMAL DIFFUSIVITY MEASUREMENT

Study of the Effect of Thermal Dispersion on Internal Natural Convection in Porous Media Using Fourier Series

Introducing a novel method for determining the effective thermal conductivity at moderate and high Péclet numbers

A Noncontact Method for Measuring Thermal Conductivity and Thermal Diffusivity of Anisotropic Materials

Theory and Measurement of Heat Transport in Solids: How Rigidity and Spectral Properties Govern Behavior

Implicit numerical schemes for generalized heat conduction equations

Accurate transient heat flux from simple treatment of surface temperature distribution in the semi-infinite case

Imposing different boundary conditions for thermal computational homogenization problems with FFT‐ and tensor‐train‐based Green's operator methods

A laser-based Ångstrom method for in-plane thermal characterization of isotropic and anisotropic materials using infrared imaging

Experimental Determination of Heat Transfer Coefficient on Impingement Cooled Gear Flanks: Validation of the Evaluation Method