Abstract:A series of polyester polyols were synthesized using 1,6-hexanediol (HDO), 1,4-cyclohexanedimethanol (1,4-CHDM) and trimethylol propane (TMP), alone or in combination with 1,4-cyclohexanedicarboxylic acid and adipic acid. The polyester polyols were reacted with isocyanate trimers to form polyurethane (PU) coatings. Physical properties of the polyesters such as hydroxyl value, acid value, molecular weight, viscosity, and glass transition temperature (Tg) had been determined, and the IR spectroscopic analyses of polyesters/PU were reported. The properties (impact resistance, film flexibility, hardness, optical transmittance, chemical resistance, water absorption, thermostability, and phase separation) of the PU coatings so prepared were characterized. The viscosities of polyester polyols were dependent on the structure of the alcohols. Polyester polyol containing only linear aliphatic diol (HDO) was a transparent liquid at room temperature. The viscosity was increased by raising the molar ratio of 1,4-CHDM and/or TMP. All PU coatings had excellent flexibility, impact resistance, and hardness. The coatings derived from diol CHDM had the highest hardness, and the PU derived from diol HDO had the lowest hardness. The chemical resistance and water absorption improved with greater molar ratios of 1,4-CHDM or TMP. Results of differential scanning calorimetry and wide-angle X-ray diffraction indicated that there was no obvious crystallinity in the PU networks. Dynamic mechanical analysis (DMA) results revealed that both CHDM and TMP can increase the Tg of PU, and the crosslinking density improved with increased molar ratio of TMP. Atomic force microscope (AFM) and DMA analysis revealed that the PU coatings had no obvious microphase separation, which enabled them to have excellent properties, and the different composition in polyols did not have significant influence on transmittance in the visible region. Results of thermogravimetric measurements indicated that all the PU coatings had good thermal stability.

Properties of Polyurethane Elastomers Based on Poly (Oxyethylene-Co-oxytetramethylene) Diol

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

High Cis-1,4 Hydroxyl-Terminated Polybutadiene-Based Polyurethanes with Extremely Low Glass Transition Temperature and Excellent Mechanical Properties

Effect of soft segment structure on properties of polyurethane elastomers

Synthesis and properties of elastomeric polyurethane for grouting

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

The Structure and Dynamic Properties of Thermoplastic Polyurethane Elastomer/Hindered Phenol Hybrids

Effects of Polyether and Polyester Polyols on the Hydrophobicity and Surface Properties of Polyurethane/Polysiloxane Elastomers

Synthesis and physical properties of poly(fluoroalkylether)urethanes

A multi-functional polyurethane elastomer with high damping, water resistance and flame retardancy

Study on Mechanical Properties of Polyurethane Cross-Linked P(E-co-T)/PEG Blended Polyether Elastomer

CO2-based Polyurethane Elastomers with Enhanced Mechanical and Tunable Room-Temperature Damping Performances

Poly(silyl ether-sulfone-urethane)s: toward preparation of polyurethanes with high glass transition temperature

Thermal properties of polyurethane elastomer with different flexible molecular chain based on para-phenylene diisocyanate

Synthesis and Properties of Polyurethane Modified with Aminoethylaminopropyl Poly(dimethyl Siloxane)

Study on the Properties of Polyurethane–Urea Elastomers Prepared by TDI/MDI Mixture

Synthesis and modification of waterborne polyurethane derived from hybrid CO2-based polyols

Preparation of Polyurethane‐Urea Elastomers Using Low Molecular Weight Aliphatic Diamines Enabled by Reversible CO2 Chemistry

Cast Molded Polyurethane Elastomer Prepared by Using Aromatic Diol as a Chain Extender

Transparent polyester polyol-based polyurethane coatings: the effect of alcohols

Preparation and properties of polyester diol and waterborne polyurethane