Abstract:Aluminum alloys, characterized by their low density and high mechanical strength, are widely applied in the manufacturing sector. However, the application of aluminum alloys in extreme environments presents severe corrosion challenges. Sol–gel organic coating techniques have garnered significant attention due to their excellent stability, barrier properties, and cost-effectiveness, as well as their simpler processing. Nevertheless, conventional sol–gel coatings are unable to withstand the corrosive effects of high-chloride and high-halide ion environments such as marine conditions, owing to their inherent structural defects. Therefore, this study proposes the utilization of a simple method to synthesize catechol (CA) and meta-phenylenediamine (MPD)-derived catecholamine compounds to modify sol–gel coatings. Surface characteristics of the modified coatings were analyzed using Fourier-transform infrared spectroscopy (FT-IR), ultraviolet-visible (UV-Vis) spectroscopy, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The thickness of the modified coating was approximately 6.8 μm. The CA/MPD-modified substance effectively densifies the sol–gel coating, enhancing its corrosion protection performance. A 3.5 wt% NaCl solution was used to simulate a marine environment, and electrochemical impedance spectroscopy (EIS) was conducted using an electrochemical workstation to evaluate the coating's protective properties over a long-term period. The results indicate that the modified coating provides protection for 3003 aluminum alloy for a minimum of 30 days under corrosive conditions, outperforming unmodified sol–gel coatings in terms of corrosion resistance.

Rare Earth Application in Sealing Anodized Al-Based Metal Matrix Composites

Study on the rare earth sealing procedure of the porous film of anodized Al6061/SiCp

Studies on the process and property of rare earth sealing for anodized LY12 aluminum alloy

Corrosion behavior of rare earth sealing anodized coating on aluminum alloy LY12

Electrodeposition of aluminum on rare earth alloy surface in room temperature molten salts

Hydrothermal and cerium salt sealing of a 6061 aluminum alloy

GREEN SEALING METHOD OF ANODIC ALUMINA FILMS

Corrosion resistance of anodically oxidized LY12 aluminum alloy after modification with cerium nitrate and silane

Effect of Different Sealing Treatments of Oxide Films on Corrosion Resistance of Anodized ZL101A Aluminum Alloy in Simulated Marine Atmospheric Environment

Electrochemical Study of Corrosion Behavior of Rare Earth Based Chemical Conversion Coating on Aerospace Aluminum Alloy

Mixed Rare Earth Metal Conversion Coatings on 2024 Alloy and Al6061/Sicp Metal Matrix Composites

Low Temperature Sealing of Anodized Aluminum Alloy for Enhancing Corrosion Resistance

Composition, Structure and Properties of Rare Earth Metal Conversion Coating on Al 6061/SiCp

Inhibitive Effect of Seawater on the Corrosion of Particulate-Reinforced Aluminum-Matrix Composites and Monolithic Aluminum Alloy

Study on anodic oxidation of 2099 aluminum lithium alloy and sealing treatment in environmental friendly solutions

Catechol/m-Phenylenediamine Modified Sol–Gel Coating with Enhanced Long-Lasting Anticorrosion Performance on 3003 Al Alloy

Research Progress in Sealing Treatment of Anodic Coatings Formed on Magnesium Alloys

Improving the cavitation corrosion resistance of 6061 aluminum alloy by anodizing

EFFECTS OF RARE-EARTH SURFACE MODIFICATION OF THE Α-Al2o3 MICROPOWDER ON THE PROPERTIES OF ALUMINUM MATRIX COMPOSITES

Enhanced long-term corrosion protection of 2A14 aluminum alloy: Hybrid effect of micro-arc oxidation coating and cerium based conversion treatment

Dual function of rare earth carboxylate compounds on the barrier properties and active corrosion inhibition of epoxy coatings on mild steel