Abstract:Aluminum alloys are widely used in the automotive, aerospace and construction fields due to their excellent physico-mechanical properties. Nevertheless, the corrosion resistance of bare Al alloys is often insufficient to meet the requirements of several industrial applications and protection strategies are needed. Among these, anodizing is particularly effective since it can lead to the formation of a compact and thick dielectric oxide layer with barrier and corrosion protection capabilities. However, anodizing of highly alloyed Aluminum alloys (e.g. those with an alloy element concentration higher than 5% wt ) can be particularly challenging due to the presence of intermetallic precipitates within the Al matrix which generates micro-galvanic coupling events with an associated thickness inhomogeneity of the obtained anodic layer [1]. In this context, the work investigates ten new current waveforms for anodizing of Aluminum Silicon alloys (AlSix). Particular attention is devoted to the interplay among waveform parameters (e.g. duty cycle, peak and rest step intensities), oxide layer morphology and corrosion resistance. In particular, metallography, voltammetry and contact angle methods are used in order to correlate different figures of merit with the anodic layer morphological features. It is concluded that a careful optimization of the current waveform parameters can modulate the: a) corrosion current; b) corrosion potential; c) breakdown potential; and d) polarization resistance; of coated specimens. In conclusion, the most effective waveforms are identified and coated Aluminum alloy specimens with a remarkable corrosion resistance are obtained. [1] M Bandiera, A Bonfanti, M Bestetti, F Bertasi, SAE International Journal of Advances and Current Practices in Mobility 3 (2), 973-979.

Improving the cavitation corrosion resistance of 6061 aluminum alloy by anodizing

Improving the Corrosion Resistance of 6061 Aluminum Alloy Using Anodization and Nickel-Cobalt based Sealing Treatment

Improving the Corrosion Behaviour of 6061 Aluminum Alloy by Controlled Anodic Formed Oxide Layer

Effect of Different Sealing Treatments of Oxide Films on Corrosion Resistance of Anodized ZL101A Aluminum Alloy in Simulated Marine Atmospheric Environment

Hydrothermal and cerium salt sealing of a 6061 aluminum alloy

Cavitation erosion of the AA7050 aluminum alloy in 3.5 wt% NaCl solution—Part 1: mitigating effect by corrosion

Study on anodic oxidation of 2099 aluminum lithium alloy and sealing treatment in environmental friendly solutions

Corrosion resistance of anodically oxidized LY12 aluminum alloy after modification with cerium nitrate and silane

Anti-Corrosion Property of Atomic Layer Deposition Films for Anodized Aluminum

Study on the surface ceramization of aluminum alloy

Influence of adjusting the anodizing and aging sequences on the microstructure, fatigue property and corrosion resistance of anodized AA6082 alloys

Changes in the Structure and Corrosion Protection Ability of Porous Anodic Oxide Films on Pure Al and Al Alloys by Pore Sealing Treatment

Characterization of the Anodic Film and Corrosion Resistance of an A535 Aluminum Alloy after Intermetallics Removal by Different Etching Time

Study of the Synergistic Influence of Plasma Electrolytic Oxidation and Wet Post-Treatment on the Surface of AA7075

Improving corrosion resistance of anodized AA2099-T83 Al-Cu-Li alloy through post-treatment in a lithium nitrate-based solution

Effect of sealing treatment on the corrosion behavior of anodized AA2099 aluminum-lithium alloy

Anodizing of Pure Aluminum Alloy with Incorporated Ferric Oxide Nanoparticles to Enhance the Aluminum Corrosion Resistance

Effect of the Anodizing Temperature on Microstructure and Tribological Properties of 6061 Aluminum Alloy Anodic Oxide Films

Interplay between Anodizing Parameters and Corrosion Resistance of Aluminum-Silicon Alloys

Study on the Influence of Surface Treatment Process on the Corrosion Resistance of Aluminum Alloy Profile Coating

Fluorinated Siloxane Modified Layered Double Hydroxide Sealing Film to Enhance the Corrosion Resistance of Anodic Oxide Film of Fricition Stir Welding Joint of Aluminum Alloys