Abstract:Aluminum alloys are extensively used in many fields such as aeronautics, astronautics, vehicle manufactures and living products clue to their good mechanical properties and anti-corrosion performance. Traditionally, the most effective corrosion protection technologies are based on the use of Cr6+ containing formulations to extend the applications of aluminum alloys in high corrosive media such as chlorides containing solutions. However, the recent recognition that chromates are highly toxic and carcinogenic has led to extensive research to develop new alternatives. Many works have been published using different conditions to obtain rare earth (RE) conversion layers on several aluminum substrates. Unfortunately, these reported anti-corrosion technologies based on RE modified films presented several drawbacks including long formation time, high formation temperature and even high potential in some cases. The goal of the present work is to introduce the novel cathode electrophoresis technique to quickly deposit cerium modified film on the surface of Al 5083. The morphology and structure of the RE. film were characterized by SEM, EDS and XRD, the corrosion resistance was investigated by EIS and potentiodynamic polarization curves in 0.1 mol/L NaCl solution. The results showed that uniform CeO2 film of 0.8 mu m thickness can be prepared by cathode electrophoresis process in 0.1 mol/L Ce(NO3)(3) ethanol solution at a voltage of 12 V for 60 s. Polarization curves confirmed its excellent protective property through inhibiting the cathodic reaction. Impedance data collected from EIS in 0.1 mol/L NaCl solution remained capacitive for 31 d, which indicated the lack of localized corrosion. With the increase of exposure time, the charge-transfer resistance R-p became higher, the surface capacitance C-t nearly kept constant and cracks of the film reduced obviously, demonstrating a self-healing property. Apparently local cathodes were covered during the RE modification processes, thereby reducing the driving force for pitting.

Study on the rare earth sealing procedure of the porous film of anodized Al6061/SiCp

Rare Earth Application in Sealing Anodized Al-Based Metal Matrix Composites

Composition, Structure and Properties of Rare Earth Metal Conversion Coating on Al 6061/SiCp

Studies on the process and property of rare earth sealing for anodized LY12 aluminum alloy

Hydrothermal and cerium salt sealing of a 6061 aluminum alloy

Electrodeposition of aluminum on rare earth alloy surface in room temperature molten salts

Characterization and Cathode Electrophoresis Deposition of Cerium Modified Films on Al 5083

Corrosion resistance of anodically oxidized LY12 aluminum alloy after modification with cerium nitrate and silane

GREEN SEALING METHOD OF ANODIC ALUMINA FILMS

Corrosion behavior of rare earth sealing anodized coating on aluminum alloy LY12

Mixed Rare Earth Metal Conversion Coatings on 2024 Alloy and Al6061/Sicp Metal Matrix Composites

Study of mixed rare earth metal (REM) conversion coating on aluminum alloy LY12

Study of double layer rare earth metal conversion coating on aluminum alloy LY12

The preparation and corrosion behaviors of MAO coating on AZ91D with rare earth conversion precursor film

Electrochemical Study of Corrosion Behavior of Rare Earth Based Chemical Conversion Coating on Aerospace Aluminum Alloy

Surface evaluation and electrochemical behavior of cerium conversion coating modified with silane on magnesium alloy

STUDY ON THE CORROSION BEHAVIOR OF Ce CONVERSION COATINGS ON Al6061/SiCp COMPOSITES

Electrochemical study of the corrosion behavior of Ce sealing of anodized 2024 aluminum alloy

Xps Analysis of the Cerium Conversion Coating on the Anodized Al6061/Sicp

Effect of calcium–magnesium–aluminum silicate composition on reaction behavior for X1‐Gd2SiO5 and X2‐Er2SiO5 environmental barrier coatings

Investigation of plasma electrolytic oxidation coating formed on two Al–Si–Mg alloys via advanced X-ray computed tomography