Abstract:Carbon fiber fabric reinforced shape memory polymer composite (SMPC) is studied in this paper. The shape memory polymer (SMP) is a thermoset styrene-based resin. In order to discuss the basic thermomechanical properties of SMPC, the investigation is conducted with the following methods: dynamic mechanical analyzer (DMA), three-point bending test, shape recovery tests and scanning electron microscope (SEM). Results indicate that SMPC exhibits a higher glass transition temperature (T(g)) and a higher storage modulus than pure SMP. SMPC shows high bending modulus before the glass transition in SMP, while exhibits low bending modulus within the range of glass transition in SMP. Moreover, shape recovery velocity and ratio rise remarkably with the increase of shape recovery temperature, while they increase in a weak trend with the increase of pre-deformation temperature. In addition, electrically conductive SMPC shows favorable recovery performances during the thermomechanical cycles. In the end, under the bending deformation, all the buckled fibers in inner surface break at the same time, which make it regular for the fracture section of buckled fiber tow. However, the cross sections of these buckled fibers are relatively rough and located in 45 degrees C direction along fiber. By contrast, the tensile fibers in outer surface break unorderly, which make it irregular for the fracture section of tensile fiber tow. But the cross sections of these tensile fibers are relatively smooth and vertical to fiber.

Studying the Thermomechanical Behavior of Sm Composites with Aligned Sma Short Fibers by Micromechanical Approaches

Micromechanical Modelling of Shape Memory Alloy Composites

Micromechanics of Composites Reinforced in the Aligned SMA Short Fibers in Uniform Thermal Fields

MECHANICAL PROPERTIES OF SMA COMPOSITES EMBEDDED WITH ALIGNED SMA SHORT FIBER IN ELASTOPLASTIC MATRIX

Thermomechanical Response of Sma Fiber Composites with Non-Uniform Temperature Distribution

Macroscopic Mechanical Characterization of SMAs Fiber-Reinforced Hybrid Composite under Uniaxial Loading

Transformation Behavior of Shape Memory Alloy Short Fiber Composites with Elastoplastic Matrix

Thermomechanical and Shape Memory Properties of SCF/SBS/LLDPE Composites

TRANSFORMATION BEHAVIOR OF COMPOSITES REINFORCED IN SMA SHORT FIBERS UNDER THERMAL LOAD CONDITIONS

Prediction Of Effective Stress-Strain Behavior Of Sm Composites With Aligned Sma Short-Fibers

Interface stress transfer model and modulus parameter equivalence method for composite materials embedded with tensile pre-strain shape memory alloy fibers

Constitutive Relationship and Applications of Shape-Memory Alloys

Study on the Interfacial Shear Stress of a Shape Memory Alloy Long-Fiber Reinforced Composite

Thermo-mechanical Modeling and Characterization of Three-Phase Shape Memory Alloy Hybrid Composites

Thermal Mechanical Constitutive Model of Fiber Reinforced Shape Memory Polymer Composite: Based on Bridging Model

Thermal expansion of composites with shape memory alloy inclusions and elastic matrix

Experimental and Numerical Investigation on the Macroscopic Mechanical Behavior of Shape Memory Alloy Hybrid Composite with Weak Interface

MECHANICAL PROPERTIES OF ELASTOPLASTIC MATRIX COMPOSITE REINFORCED BY LONG SMA FIBERS

Mechanical Properties of Shape Memory Alloy Reinforced Composite

THERMAL EXPANSION COEFFICIENT AND TRANSFORMATION STRAIN COEFFICIENT OF COMPOSITES REINFORCED BY SMA SHORT FIBERS

Thermomechanical Behavior Of Fiber Reinforced Shape Memory Polymer Composite