Abstract:Conventional fiber-reinforced polymers (FRPs) have a relatively linear stress-strain behavior up to the failure point. Therefore, they show brittle behavior until the failure point. Shape memory alloys, in addition to having high ductility and good energy dissipation capability, are highly resistant to corrosion and show good performance against fatigue. Therefore, using the SMA fibers in the production of FRPs can be a suitable solution to solve the problem of the brittle behavior of conventional FRPs. SMA fibers can be integrated with a polymeric matrix with or without conventional fibers and create a new material called SMA-FRP. This study investigates the effect of using different volume fractions of conventional fibers (carbon, glass, and aramid) and SMA fibers (NiTi) in the super-elastic phase and the effect of the initial strain of SMA fibers on the behavior of SMA-FRP composites under cyclic tensile loading. Specimens are designed to reach a target elastic modulus and are modeled using OpenSees (v. 3.5.0) finite element software. Analyzing the results shows that in the SMA-FRP composites that are designed to reach a target elastic modulus, with an increase in the volume fraction of SMA fibers, the maximum stress, residual strain, and strain hardening ratio are reduced, and the ability to energy dissipation capability and residual stress increases. It was also observed that increasing the percentage of the initial strain of SMA fibers increases the maximum stress and energy dissipation capability and reduces the residual strain and yield stress. In the investigation of the effect of the type of conventional fibers used in the construction of composites, it was found that the use of fibers that have a larger failure strain increases the maximum stress and energy dissipation capability of the composite and reduces the strain hardening ratio. In addition, increasing the elastic modulus of conventional fibers increases the residual strain and residual stress of the composites.

Transformation Behavior of Shape Memory Alloy Short Fiber Composites with Elastoplastic Matrix

Two-Dimensional Analysis of Shape Memory Alloys under Small Loadings

Dynamics of Shape Memory Alloys Patches

A Molecular Dynamics Investigation of the Deformation Mechanism and Shape Memory Effect of Epoxy Shape Memory Polymers

Finite Strain Constitutive Modelling of Shape Memory Alloys Considering Partial Phase Transformation with Transformation-Induced Plasticity

A Three-Dimensional Constitutive Modeling for Shape Memory Alloys Considering Two-Way Shape Memory Effect and Transformation-Induced Plasticity

A Finite Strain Constitutive Model Considering Transformation Induced Plasticity for Shape Memory Alloys under Cyclic Loading

Finite strain constitutive modeling for shape memory alloys considering transformation-induced plasticity and two-way shape memory effect

Temperature Induced Cubic-to-Tetragonal Transformations in Shape Memory Alloys Using a Phase-Field Model

Interface stress transfer model and modulus parameter equivalence method for composite materials embedded with tensile pre-strain shape memory alloy fibers

The Mechanical Behavior and Martensitic Transformation of Porous Niti Alloys Based on Geometrical Reconstruction

Enhancing Mechanical Behavior and Energy Dissipation in Fiber-Reinforced Polymers through Shape Memory Alloy Integration: A Numerical Study on SMA-FRP Composites under Cyclic Tensile Loading

Modeling evolutions of plastic strain, maximum transformation strain and transformation temperatures in SMA under superelastic cycling

Micromechanical Modeling on Thermomechanical Coupling of Cyclically Deformed Superelastic NiTi Shape Memory Alloy

Experimental Investigation on Mechanical Properties of Shape Memory Alloy Fibre-Reinforced ECC Composite

A Finite Strain Constitutive Model for Martensitic Transformation in Shape Memory Alloys Based on Logarithmic Strain

Effects of Heat Treatment and Ecae Process on Transformation Behaviors of Tini Shape Memory Alloy

A three-dimensional constitutive model for the martensitic transformation in polycrystalline shape memory alloys under large deformation

One-Dimensional Constitutive Model of Shape Memory Alloy with an Empirical Kinetics Equation

Martensitic transformation and stress-strain relations of shape-memory alloys

Modeling Approach and Finite Element Analyses of a Shape Memory Epoxy-Based Material