Abstract:Strengthening reinforced concrete elements with externally bonded prestressed fiber reinforced polymer (FRP) sheets has become a popular reinforcement technology in recent years. However, in practical engineering applications, due to the limitations of construction operation space and the need for specialized design of tensioning and anchoring devices, it is very cumbersome to apply prestressing force to FRP sheets. Therefore, using the recovery effect of shape memory alloys (SMA) to introduce prestressing into FRP sheets can innovate a new approach by combining FRP sheets and SMA wires. In order to study the basic mechanical properties of FRP/SMA composites, carbon fiber reinforced polymer and shape memory alloys were used to make the composite specimens, and uniaxial tensile tests were carried out on them. The mechanical properties such as the stress-strain curve, failure mode, ultimate tensile strength and fracture strain were obtained. The test results show that CFRP sheet exhibits obvious linear elastic behavior in tensile tests. The stress-strain curve of SMA wire can be divided into four stages: the linear elastic stage, yield stage, strengthening stage and failure stage. The fracture strain at failure can reach 7%, which indicates excellent deformation properties. The loading and unloading cycles have little effect on the mechanical properties of SMA wire. With the increase in the loading rate, the 'stress plateau' section of the phase transformation section of the SMA wire hysteresis curve gradually transits to an oblique upward curve. Increasing the pre-strain value within a certain range can improve the resilience of SMA wires. SMA wires with a pre-strain value of 8% can provide a maximum resilience of 514 MPa after heating to the austenitic state. A prediction model for the number of temperature cycles and maximum recovery force of SMA was proposed and validated. According to this model, the SMA wires can still provide stable resilience after 30 cycles. Increasing the amount of wire (volume ratio) can improve the maximum fracture strain and ultimate tensile strength of CFRP/SMA composite specimens, and the more wire is added, the greater the residual strength after fracture. The diameter of the fiber can significantly reduce the maximum fracture strain and ultimate tensile strength of the FRP/SMA composite specimen.

THERMAL EXPANSION COEFFICIENT AND TRANSFORMATION STRAIN COEFFICIENT OF COMPOSITES REINFORCED BY SMA SHORT FIBERS

Interface stress transfer model and modulus parameter equivalence method for composite materials embedded with tensile pre-strain shape memory alloy fibers

A basic interpersonal approach to health education in industry.

Real-time Evaluating Temperature-Dependent Interfacial Shear Strength of Thermoplastic Composites Based on Stress Impedance Effect of Magnetic Fibers

Pre-use Interfacial Shear Strength Prediction for Fiber-Reinforced Thermosetting Composites Based on Stress-Impedance Effect of Ferromagnetic Microwires

Multiscale Thermomechanical Modeling of Short Fiber-Reinforced Composites

A Micromechanical Model for Interpenetrating Multiphase Composites

Experimental Study on the Static Behavior and Recovery Properties of CFRP/SMA Composites

Experimental and theoretical investigations of the viscoelastic behaviour of short carbon fiber reinforced polyetherimide composites

A numerical study on the coefficients of thermal expansion of fiber reinforced composite materials

Vari-stiffness characteristics of a 3D SMA hybrid basalt woven composite

Thermal Conductivity of Hybrid Short Fiber Composites

A 3D finite deformation constitutive model for anisotropic shape memory polymer composites integrating viscoelasticity and phase transition concept

A 3D anisotropic visco-hyperelastic constitutive model for unidirectional continuous fiber reinforced shape memory composites

Thermal expansion coefficients of 3-D braided composites with penny-shaped microcracks

Thermal expansion coefficients of fiber composites defined by the concept of the interphase

Study on mechanical properties and thermal conductivity of 3D short carbon fiber reinforced ultra-high temperature ceramic matrix composites: A novel material performance evaluation model

Experimental study of thermal expansion behavior on braided structure composite

Prediction for the mechanical property of short fiber-reinforced polymer composites through process modeling method

Thermo-mechanical Modeling of Woven Fabric Reinforced Shape Memory Polymer Composites

Micromechanics-based Modeling of Temperature-Dependent Effective Moduli of Fiber Reinforced Polymer Composites with Interfacial Debonding