Abstract:The heat transfer of near-critical fluids has become a key topic as the transcritical/supercritical energy systems are more and more proposed in recent years. When fluids go across the critical point or the equilibrium curve in the phase boundaries in the critical region, dramatic changes happen in fluid properties. For example, the thermal diffusivity goes to zero and the compressibility diverges. Such effects introduce additional complexibility in thermal systems with supercritical fluids (heat exchanger, turbines, reactors, etc.). For the efficiency analysis in heat transfer and stability in small-scale, the current numerical study is proposed. In this study, non-equilibrium cooling process is discussed with the highly compressible near-critical fluid inside a two-dimensional chamber model. The typical size of the critical chamber is around 5 mm, in which the fluid is initially rested under 1g or 0g conditions. The system is described by a continuous Navier-Stokes equations and solved by coupling the equation of state that written in scaling form for the near-critical properties, which is defined by the distance parameter ε = (T-Tc)/Tc. The equations are solved by a Finite Volumn Method. It is found that the basic wave propation process happen in ~10-4 second time-scale, which is generated from the cooling boundary. Under such conditions, the collapse of the boundary layer happens when the near-wall fluid firstly become near-critical and it condensed toward the cooling wall. After that, the acoustic waves go forth and back through the chamber and the critical boundary line moves forward toward the adiabatic side. For 1g cases, it is found that the near-critical fluid would fall strong convection near the wall region and form interesting structures in the lower region of the cell. This study reports the first results on near-critical cooling process. Detailed parameter evolutions and indications for critical cooling process are discussed into detail in this study.

Influence of Near-Wall Factors on the Critical Heat Flux

Effects of Thermal Boundary Conditions on Heat Transfer Characteristics of Supercritical Water

Numerical Analysis on the Thermal Responses of Near-Critical Fluid to Transient Cooling Process

A Method of Extending Subcritical Heat Transfer Correlations to Supercritical Conditions

Flow behavior and heat transfer characteristics of liquid film on vertical hot surface by inclined jet impingement

Deterioration and Instability of Heat Transfer to H2O/CO2 Mixtures in Near-Critical Region for Horizontal Flow

Enhancing the Critical Heat Flux Using Microchanneled Surfaces

Influence of Foreign Body Blockage in Water Cooling Wall on Flow and Heat Transfer

Influence of coolant mass flow rate on the endwall conjugate heat transfer

Heat transfer deterioration in a supercritical water channel

Numerical investigation of spatial-developing turbulent heat transfer in forced convections at different supercritical pressures

Effect of Circumferential Flow Non-uniformity on the Temperature Distribution of Membrane Water Wall in Supercritical Boilers and Simplified Calculation Methods

Correlations between wall heat flux and Reynolds shear stress/turbulent heat flux in compressible turbulent boundary layers

A Critical Heat Flux Model for Saturated Flow Boiling on the Downward Curved Heated Surface

Experimental investigation and a mechanical model of critical heat flux in a narrow rectangular channel

Effects of Local Geometry and Boundary Condition Variations on Transpiration Cooling

Influence of non-uniform wall heat flux on critical heat flux prediction in upward flowing round pipe two-phase flow

Convective Heat and Mass Transfer in Water at Super-Critical Pressures under Heating or Cooling Conditions in Vertical Tubes

Analysis of the flow and heat transfer in the melting process

Heat Transfer to Supercritical Water in Circular Tubes with Circumferentially Non-Uniform Heating

Numerical Investigation of Supercritical Water Turbulent Flow and Heat Transfer Characteristics in Vertical Helical Tubes