Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Transient Behavior of Internal Faults in Stator Windings of Salient-Pole

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Calculation of the main parameters of induction machines under rotor winding faults

Performance Simulation of Long-Stator Linear Synchronous Motor for High-Speed Maglev Train under Three-Phase Short-Circuit Fault

DISCUSSION ON THE TRANSIENT REGULARITIES OF STATOR INTERNAL FAULTS IN SALIENT-POLE SYNCHRONOUS MACHINE

Improved Transient Simulation Of Salient-Pole Synchronous Generators With Internal And Ground Faults In The Stator Winding

Comprehensive simulation for faults in the stator windings of salient-pole synchronous generators

TRANSIENT CALCULATION OF STATOR'S INTERNAL FAULTS IN SYNCHRONOUS GENERATOR USING FEM COUPLED WITH MULTI-LOOP METHOD

Modeling and Simulation of Non-Linear Dynamic Process of the Induction Motor System with Fluctuating Potential Loads

Steady-state Mathematical Modeling and Simulation of Inter-turn Short Circuit of Field Windings in Synchronous Machines

A Study of Armature Winding Internal Faults for Turbogenerators

Simulation and Analysis of Squirrel Cage Induction Machines under Rotor Internal Faults

Studies on the Internal Fault Simulations of a High-Voltage Cable-Wound Generator

Modeling of Interturn Short Fault in Interior Permanent Magnet Synchronous Motors with Multistrand Windings

A study of armature winding internal faults and protection schemes for turbogenerators

Research on Internal Fault of Generator Including Saturation

SIMULATION AND LAWS OF THE INTERNAL STATOR WINDING FAULTS OF SALIENT GENERATOR

Calculation of the Multi-loop Inductances for Inter-turn Short Circuits of Field Windings in Non-salient Pole Synchronous Machines

Transient Characteristic Modeling of DFIG Considering Control Loop under Grid Voltage Fault

Math Model and Fault Characteristics of Field Winding Inter-turn Short Circuit of Synchronous Generator