Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Steady-state Currents Harmonic Characteristics of Synchronous Machine With Inter-turn Short Circuits of Field Windings

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

MMF Harmonic Analysis of Multi-M-Phase Fractional-Slot PM Machines with Partial Operating Winding Sets

Steady-state Mathematical Modeling and Simulation of Inter-turn Short Circuit of Field Windings in Synchronous Machines

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Steady-State Calculation And Online Monitoring Of Interturn Short Circuit Of Field Windings In Synchronous Machines

Effects of Stator Winding Configurations on Steady-state Currents Characteristics of Synchronous Generator With Inter-turn Short Circuits of Field Windings

Calculation of the Multi-loop Inductances for Inter-turn Short Circuits of Field Windings in Non-salient Pole Synchronous Machines

Simulation Research on Inter-Turn Short Circuits of Field Windings in Synchronous Machines

Math Model and Fault Characteristics of Field Winding Inter-turn Short Circuit of Synchronous Generator

Online Identification Methodology of Field Winding Short Circuit Fault of Turbogenerator

Assessment of Interturn Short-Circuit Faults in PMSMs with Parallel-Connected Winding

Theoretical Analysis and Calculation Model of the Electromagnetic Torque of Nonsalient-Pole Synchronous Machines With Interturn Short Circuit in Field Windings

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

Harmonic Analysis of Short Circuit Air Gap Magnetic Field in Interturn Field Winding of Large Turbo Generator

Strategies for the fault-tolerant current control of a multiphase machine under open phase conditions

The Steady-state Fault Characteristics of a Large Hydro-generator with Inter-turn Short Circuit of Field Windings

Electromagnetic Torque of Synchronous Generator with Inter-turn Short Circuit in the Field Winding

Analysis and Detection of Inter-Turn Short-Circuit Fault Through Extended Self-Commissioning

Robust Stator Winding Fault Detection in PMSMs with Respect to Current Controller Bandwidth

Performance Investigation of A Brushless Synchronous Machine with Additional Harmonic Field Windings