Abstract:The solidification and corrosion behavior of the Ti/B added Zn-Al-Mg alloys were experimentally investigated by means of microstructure characterization and electrochemical test.The basic calculations were carried out to predict the characteristics of the Ti-added Zn-Al-Mg alloys.The Zn-Al-Mg ingots with minor doping of Ti/B were prepared and solidified under different cooling rate,including air cooling,water quenching and furnace cooling.The scanning electron microscopy (SEM) and the X-ray diffraction method (XRD) were used to determine the microstructures and phase types of the alloy samples.It could be discovered that trace TiAl 3 particles were dispersed in the Ti/B added alloy samples which provide the heterogeneous nucleation sites to refine the size of the dendrites and the eutectic microstructures.More fined microstructures with the addition of both Ti and B were obtained compared with those with the merely addition of Ti,and the water cooled alloys presented the finest microstructures due to the fastest cooling rate.It could also be noticed that with the increasing solidification rate,the percentage of the MgZn 2 phase turned out to be higher because of the Mg 2 Zn 11 ?MgZn 2 transition,which is in consistent with the results in the actual hot-dip galvanizing process.Electrochemical experiments in the previous work included methods the of the Tafel polarization test and the electrochemical impedance spectroscopy test (EIS).Results show that the quenched Zn-Al-Mg alloy with the addition of both Ti and B takes on best corrosion resistance.Consequently,the addition of certain amount of Ti/B elements and the appropriate elevation of the cooling rate will be the practicable approaches to optimize the microstructure and the corrosion resistance of the Zn-Al-Mg coatings in the actual galvanizing process.

RESEARCH PROGRESS OF LIQUID METAL INDUCED CORROSION

The developments in corrosion and protection of dental alloys

AFM in Liquid and On-Spot Study of Metal Corrosion

Review of the studies on fundamental issues in LBE corrosion

REVIEW OF RESEARCH ON CORROSION BEHAVIOR OF Al-Li ALLOYS

Microstructure and Corrosion Resistance Property of a Zn-AI-Mg Alloy with Different Solidification Processes

Overview of progress of liquid metal applications in nanomaterials, flexible electronics and new energy

Novel Anticorrosion Property of Organic Coating Based on Liquid Metal

CORROSION BEHAVIOR OF HOT WORK STEEL CONTAININGHIGH Co IN LIQUID MAGNESIUM ALLOY AZ91D

Corrosion resistances of metallic materials in environments containing chloride ions: A review

Investigation on the microstructural evolution and corrosion behaviors of Zn-microalloyed Al-Cu-Li alloys

Influence mechanism of different elements and alloy phases on the corrosion resistance of Zn-Al-Mg coated steel in the atmospheric environment: A review

The Solidification and Corrosion Behavior Determination of the Ti/B Added Zn-Al-Mg Alloys

Influence of β-Mg 17 Al 12 and Al-Mn intermetallic compounds on the corrosion behaviour of cast and solution treated Mg-Al-Zn-Mn alloys

Progress in Preparation of Corrosion Resistant Zinc-magnesium Alloying Coating

Recent Development in Liquid Metal Materials

Influencial mechanisms of elements and alloy phases on corrosion resistance of Zn-Al-Mg coated steel in atmospheric environments: A review

Corrosion behavior of ZrN coated ferritic/martensitic steel in liquid lead-bismuth eutectic

Corrosion behaviors of Zr-Sn-Nb alloys: Influence of different concentration dissolved oxygen environment and trace V element on the anti-corrosion properties

Corrosion behavior of pure metals (Ni and Ti) and alloys (316H SS and GH3535) in liquid GaInSn

Microstructure, Mechanical Properties and Corrosion Behaviors of Al–Li–Cu–Mg–Ag–Zn Alloys