Abstract:A novel atomic force microscope (AFM) operating in liquid is described in this article. The specially designed AFM probe involves a tip attached to a cantilever, a tip holder, and a circular Plexiglas window. When the probe dives into the fluid, a circular meniscus is established around the Plexiglas window, preventing the tip from being affected or destroyed by surface tension of the liquid. In this setup, the whole scanning probe and the sample can completely dive into fluid. Meanwhile, the probe tip scans over the sample surface when the instrument works. These advantages enable the instrument to scan comparatively large or heavy samples with a high speed. The highest scan rate is about 30 lines/s or 14 s for a 400 x 400-pixel, 3 x 3 Pin image. Using the new AFM, we carry out in-situ investigation of the formation processes of porous alumina during electrochemical anodic oxidation. A lead ring and an aluminum foil serve as cathode and anode, respectively. They are entirely immersed in the bath electrolyte, which is oxalic acid solution. During anodic oxidation, the AFM images of the sample surface are successively acquired without elevating the sample out of the solution. Experiments reveal that electrochemical reactions take place soon after the power supply is switched on, and with the progression of anodization, nanostructures of porous alumina gradually occur on the aluminum substrate, finally yielding ordered arrays of nanopores. As a typical example of applications, the results of this work show that the new AFM is an ideal and powerful tool for in-situ observation and study of materials or samples in aqueous solutions. (c) 2005 Wiley-Liss.Inc.

AFM in Liquid and On-Spot Study of Metal Corrosion

In Situ Study of Corrosion with an Atomic Force Microscope Scanning in Liquids

A Novel Atomic Force Microscope Operating in Liquid for in Situ Investigation of Electrochemical Preparation of Porous Alumina.

A novel electrochemical atomic force microscope and its applications

A Novel Atomic Force Microscope Operating in Liquid with Open Probe Unit and Optimized Laser Tracking System

Atomic Force Microscope in Liquid with A Specially Designed Probe for Practical Application

A Large-Sample Atomic Force Microscope Observing in Both Air and Liquid

Atomic Force Microscope And Anti-Corrosion Processing Of Porous Alumina

Application of Atomic-Force Microscopy to Metallography

Electrokinetics In Micro-Channeled Cantilevers: Extending The Toolbox For Reversible Colloidal Probes And Afm-Based Nanofluidics

Applications of AFM in Membrane Characterization and Fouling Analysis

Measurement of Sub-Surface Microstructures Based on a Developed Ultrasonic Atomic Force Microscopy

Direct Observation of Atomic-Scale Origins of Local Dissolution in Al-Cu-Mg Alloys

A compact CCD-monitored atomic force microscope with optical vision and improved performances.

Localized corrosion of low-carbon steel at the nanoscale

A Horizontal Atomic Force Microscope and Its Applications

Study of the Raman-Afm System for Simultaneous Measurements of Raman Spectrum and Micro/Nano-Structures

In-situ AFM and quasi-in-situ studies for localized corrosion in Mg-9Al-1Fe-(Gd) alloys under 3.5 wt.% NaCl environment

In Situ Atomic Force Microscopy Observations of the Corrosion Behavior of Aluminum‐Copper Alloys

Combining AFM imaging and elementally resolved spectro-electrochemistry for understanding stability and quality of passive films formed on Alloy 600

Nanoscale Imaging of a Corrosion Reaction: Sulfuric Acid Droplets on Aluminum Surfaces