Abstract:The micro-electro-mechanical system (MEMS) resonator developed based on surface processing technology usually changes the section shape either due to excessive etching or insufficient etching. In this paper, a section parameter is proposed to describe the microbeam changes in the upper and lower sections. The effect of section change on the mechanical properties is studied analytically and verified through numerical and finite element solutions. A doubly-clamped microbeam-based resonator, which is actuated by an electrode on one side, is investigated. The higher-order model is derived without neglecting the effects of neutral plane stretching and electrostatic nonlinearity. Further, the Galerkin method and Newton⁻Cotes method are used to reduce the complexity and order of the derived model. First of all, the influence of microbeam shape and gap variation on the static pull-in are studied. Then, the dynamic analysis of the system is investigated. The method of multiple scales (MMS) is applied to determine the response of the system for small amplitude vibrations. The relationship between the microbeam shape and the frequency response is discussed. Results show that the change of section and gap distance can make the vibration soften, harden, and so on. Furthermore, when the amplitude of vibration is large, the frequency response softening effect is weakened by the MMS. If the nonlinearity shows hardening-type behavior at the beginning, with the increase of the amplitude, the frequency response will shift from hardening to softening behavior. The large amplitude in-well motions are studied to investigate the transitions between hardening and softening behaviors. Finally, the finite element analysis using COMSOL software (COMSOL Inc., Stockholm, Sweden) is carried out to verify the theoretical results, and the two results are very close to each other in the stable region.

Study On Micro-Clamping Mechanism In Mems

Study on Step Magnifying Mechanism of Precise Planar Micro-Positioner

Clamping Properties Investigation in Micro/Nano Scale Experimental Mechanics

Strength Analysis of Clamping in Micro/nano Scale Experiments

Study on technology of zinc oxide piezoelectric thin film device with surface micromachining substrate

Design of a Micro-gripper for MEMS Assembly and Its Experimental Research

MECHANICAL PROPERTIES AND SCALING EFFECTS IN MICRO-ELECTRO-MECHANICAL SYSTEMS

Design and analysis of a microgripper for trans-scale clamping based on a compliant multistable mechanism

Static and Dynamic Mechanical Behaviors of Electrostatic MEMS Resonator with Surface Processing Error

A Micro-Tensile Method for Measuring Mechanical Properties of Mems Materials

Development Of The Micro-D Is Placement Amplifier For A Novel Tester Measuring Mechanical Properties Of Mems Materials

Analysis On The Adhesion Of Micro-Comb Structure In Mems

DETERMINATION OF MECHANICAL BEHAVIOR OF MEMS MATERIALS

Study on the design of anti-sticking structures in MEMS under different forces

Investigation On Electromagnetic Microactuator And Its Application In Micro-Electro-Mechanical System (Mems)

Experimental Study on Electrical Breakdown of Micro-Electro-Mechanical Systems with Micro-Gaps

Micro-mechanical Characterisation for MEMS Thin Films by Bending Μ-Machined Cantilevers

Study On Micro Electrochemical Machining At Micro To Meso-Scale

Variation of MEMS Thin Film Device Parameters under the Influence of Thermal Stresses

Micro Field in Mems Actuators

Piezoelectric Micro Driving Mechanism Design and Experiment